Important Safety Instructions; Lamp Installation/Replacement - Vista 5204 Installation Instructions

INSTALLATION INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE, OR INJURY TO
PERSONS:
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamps get hot quickly! Contact only switch/plug when turning on.
3. Do not touch hot lens, guard or enclosure.
4. Keep lamp away from material that may burn.
5. Do not touch the lamp at any time. Use a soft cloth. Oil from the skin may
6. Do not operate luminaire fitting with a missing or damaged cover.

LAMP INSTALLATION/REPLACEMENT:

CAUTION: Do not exceed maximum wattage marked
on luminaire label.
1. To prevent electrical shock, disconnect transformer
from electrical supply before service.
2. Remove shroud to expose lamp.
3. Replace lamp with correct wattage and type
marked on fixture label.
NOTE: DO NOT touch lamp with bare hands. Always
use soft cloth or the plastic wrapping (if available)
from lamp to handle the lamp.
4. Re-install shroud.
1625 Surveyor Avenue • Simi Valley, CA 93063 • (805) 527-0987 • (800) 766-VISTA (8478)
FAX: (888) 670-VISTA (8478) • email@vistapro.com • www.vistapro.com

IMPORTANT SAFETY INSTRUCTIONS

damage lamp.
THE LIGHTED LAMP IS HOT!!
SAVE THESE INSTRUCTIONS
5204 (8/08)