Yamaha DPX-1100 Owner's Manual page 11

i INPUT button
Switches on and off the input signal selection menu display.
o LIGHT switch
Moving this switch lights the high-use 2, 6, 8, e, y, and
i buttons. The light disappears if you do not perform any
operation within 10 seconds.
p HIDE button
Temporarily halts projection of the image the DPX-1100 is
currently displaying. Press again to cancel this effect.
a Remote control code switch
The remote control functions when the code set in the menu is
the same as that set on the remote control. The default menu
setting is ID-1.
s Remote control cable jack
Connect a cable (commercially available) to this jack to link
the remote control to the main unit. ( page 8)
s
a
4
7