Outdoor Revolution Compactalite Pro Integra 250 Instructions

Outdoor Revolution
Thank you for purchasing an Outdoor Revolution product, this product will give years of satisfactory service if basic instructions
are followed, Outdoor Revolution products are designed for durability and for ease of erection.
Spare poles are not warranted but can be purchased to replace broken poles, see our website
** Compactalite Pro Integra 250 awnings will not be swapped because of broken
TIP: Refer to the photograph to help when pitching your Compactalite Pro Integra 250.
Please do not leave for your holiday without fully erecting and checking the contents of
• • • •
your porch.
Please make sure that before erecting, that you site the awning on clear Level ground
• • • •
with no sharp objects underneath, and that all the zips are fully closed. (We recommend
laying a groundsheet down to keep the awning Dry and clean)
If you have any issues relating to pitching your awning please contact your dealer for
• • • •
instructions before going on holiday.
Please note this awning is designed as a 'touring' awning and not for 'permanent pitch'
• • • •
use
(Make yourself familiar with the awning and its parts before attempting to erect)
Steel pole pre shaped 1 x cross piece 2 x leg sections & 3 x steel vertical legs
Please read the following instructions carefully
IMPORTANT PLEASE CHECK YOUR EQUIPMENT

Contents

Flysheet (or outer)
Fibreglass poles (in a separate bag)
Pegs (in a separate bag)
Outer carrying bag (with dimension details)
Stability Straps x 2 (attached to awning)
Rear pad poles x 2
Draught skirt
1 Bracket Pad
MODEL Compactalite Pro Integra 250
poles**
www.outdoor-revolution.com