Troubleshooting; The Egd Debug Webpage; Configuring And Accessing The Webpage - Emerson PACSystems User Manual

User Guide
GFK-3019G
Supported Configurations for EGD Machine Adapter (EGD interval update 480 ms)
Publish Interval
(ms)
1000-1999
2000-2999
3000-3999
≥4000
3.6

Troubleshooting

Before attempting some of these possible solutions, be sure to check that the string for each
of the configurations in the .config and .xml files are valid and not empty. For example, the
IP address should follow the correct format and should exactly match the intended IP
address.
3.6.1

The EGD debug webpage

Configuring and Accessing the Webpage

The EGD Debug Webpage is intended to aid in debugging EGD configuration issues. It can
be accessed using a web browser while the EGD Machine Adapter is running. It provides
information on the configurations, statistics of the messages, details of EGD packets, and
logging messages.
Before accessing the webpage, the following configuration modifications are needed:
1. Open the file org.ops4j.pax.logging.cfg for editing inside in
2. Add the following lines at the end of the file:
3. Save and close org.ops4j.pax.logging.cfg.
After deploying the updated configurations above, access the webpage using the following
URL:
https://<Field Agent IP address>:8443/egd/startup
If running the EGD locally on a PC instead of a Field Agent appliance, access the webpage
using the following URL:
1 Exchanges are fully populated.
EGD Machine Adapter
MFA Max Configured and
Published 4-Byte Variables
350 (one exchange)
700 (two exchanges)
1050 (three exchanges)
1400 (four exchanges)
<Configuration Template>/configuration/machine.
log4j.category.com.ge.ac.pmAdapter=DEBUG
log4j.category.com.ge.ac.pmEgd=DEBUG
log4j.category.com.ge.ac.egd=DEBUG
VFA Max Configured and Published
4-Byte Variables
1 1050 (three exchanges)
1 2450 (seven exchanges)
1 3850 (eleven exchanges)
1 5250 (fifteen exchanges)
Chapter 3
Oct 2019
1
1
1
1
12