Page 1 Window and Door Technology Roto NT The world’s biggest selling Tilt&Turn hardware system for windows and balcony doors Installation, maintenance and operation instructions for timber and PVC balcony doors with thresholds...
Page 2 Imprint Copyright: July 2014 Roto Frank AG Window and Door Technology Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen Germany Phone +49 711 7598 0 +49 711 7598 253 info@roto-frank.com www.roto-frank.com...
Page 3: Table Of Contents
Basic security ..................... 36 RC1 / RC1 N (DIN EN 1627–1630) ............. 38 NT hinge side E5 (timber) – Turn-Only and Tilt&Turn hardware ..40 Basic security .................... 40 RC1 / RC1 N and RC2 (DIN EN 1627–1630) ..........42 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 4 NT Designo (timber, PVC) – Turn-Only / Tilt&Turn hardware ..54 Basic security ..................... 54 RC1 / RC1 N and RC2 (DIN EN 1627–1630) ..........56 Parts list – Roto Eifel TB Eifel TB threshold ................58 From Eifel 40 TB to Eifel 75 TB ..............58 From Eifel 80 TB to Eifel 140 TB ..............
Page 5 Preservation of the surface finish ..........95 Dismantling Unhinging the sash ................ 97 Sash stay 250, 350 and 500 ............... 97 Transport Transport, packaging, storage ............98 Transport inspection ..............99 Disposal Disposal of window hardware ............. 101 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 6: Information On These Instructions
Also, this manual contains binding guidelines to ensure the duty to instruct through to the end-user. The information and instructions in this manual refer to the products of the Roto NT hardware system. Apart from these installation, maintenance and operation instructions, the following documents apply: ...
Page 7 The contents of this manual are protected by copyright. In the framework of the hardware manufacturing, the use of the contents is allowed. Any other or further use is not permitted without written permission of the manufacturer . Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 8: Responsibility Of The Target Groups
The “builder” target group includes all companies/persons who order windows and/or balcony doors for installation into their building project. End-users The “end-users” target group includes all persons who operate the installed windows and/or balcony doors. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 9: Instruction Obligation Of The Target Groups
– Guidelines/advice for end-users (VHBE) Responsibility of the builder The builder must transmit the following documents to the end-user: – Maintenance and operating instructions (with the focus on hardware) – Guidelines/advice for end-users (VHBE) Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 10: Explanation Of The Safety Instruction Symbols
NOTE! This symbol in conjunction with the signal word indicates a potentially dangerous situation, which may lead to property or environ mental damage if it is not avoided. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 11: Limitation Of Liability
. The warranty covers only original Roto components. The right to technical modifications for the improvement of performance characteristics and for further development is reserved.
Page 12: Stipulated Use
Never use hardware combinations that have not been approved by the hardware manufacturer. – Never use accessories that are not original products or that have not been approved by the hardware manufacturer. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 13: Stipulated Application For End-Users
This can destroy the hardware, frame materials, or other individual components of the windows or balcony doors. Claims for damages of any type whatsoever resulting of operation other than that stipulated are excluded. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 14: Safety Instructions
Do not insert obstructions into the opening gap between sash and frame. CAUTION! Danger of injury and material damage from pressing the sash against the opening edge (reveal). – Do not press the sash against the opening edge (reveal). July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 15: Safety Information For End-Users
The following symbols can be used on windows and balcony doors to protect the end-user. Always keep these symbols in a clearly legible state. Please order stickers separately (OPR_16_DE-EN). Sicherheitshinweis Security advice 08/2012 OPR_16_DE-EN_v1 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 16: Fabrication Advice For Timber And Pvc
The guidelines of the hardware manufacturer relating to the combination of the hardware (e.g. the use of additional stay arms, the design of hardware for burglary-inhibiting sashes for windows and balcony doors, etc.) are binding. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 17: Screw Fixing
Do not use any acid cross-linked sealing compounds that could lead to corrosion of the hardware components. The glazing spacer-block regulations for the glazing method are to be adhered to. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 18: Pvc
Do not use any acid cross-linked sealing compounds that could lead to corrosion of the hardware components. The glazing spacer-block regulations for the glazing method are to be adhered to. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 19 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 20: Eifel Tb Threshold
Isothermal efficiency DIN 4108-4 compliant Concealed screw-fixing 15 installation depths (40 mm–140 mm) Cover with ribbed design Use of UV-resistant, high-impact resistant PVC Isothermal efficiency according to DIN 4108-4 –5 °C outside +20 °C inside 0° 5° 10° 13.61 °C July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 21: Dimensional Data For Hardware
Dimensional data for hardware Cross section of sash profile with Eifel TB threshold Clearance condition 4 mm Timber, system Euro-rebate 16.2 12.3 13 (9) Clearance condition 10 mm Timber, system Euro-rebate 16.2 12.3 13 (9) Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 22: General Hardware Characteristics
- Turn restriction - Mishandling device in tilted position (only T&T version) – Stay bearing and pivot rest installation flush with the overlap – High-quality Roto Sil Nano surface-finish (matt-silvery) for maximum corrosion resistance (DIN EN 13126 / 8 Class 4) using Nano particles (free from Chromium VI compounds) – 10-year warranty on the operativeness of the hardware –...
Page 23: Nt Hinge Side E5
- Integrated anti-slam device - Variable tilt restrictor (80–140 mm) - Turn restriction - Mishandling device in tilted position – High-quality Roto Sil Nano surface-finish (matt-silvery) for maximum corrosion resistance (DIN EN 13126 / 8 Class 4) using Nano particles (free from Chromium VI compounds) – Rebate-hinge arm with gasket-compression adjustment to be screwed in the hardware groove...
Page 24: Nt Power Hinge
– Tested in accordance with EN 13126 – 8: 2006-02 and EN 1191: 2000-08 and certified according to QM 328 – Hinge side is available in all RAL colours – Additional turn-restrictor required for sash weights of ≥ 160 kg July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 25: Nt Designo
- Turn restriction - Mishandling device in tilted position (only T&T version) – Stay bearing and pivot rest completely concealed in the sash-rebate – High-quality Roto Sil Nano surface-finish (matt-silvery) for maximum corrosion resistance (DIN EN 13126 / 8 Class 4) using Nano particles (free from Chromium VI compounds) – 10-year warranty on the operativeness of the hardware –...
Page 26: Application Diagram
The information in the application diagram refers to the SRW 600 – 1000 mm glass weight in kg / m 1 mm / m glass thickness = 2.5 kg = Impermissible application range = Additional scissor stay required July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 27: Nt Hinge Side E5 (Timber)
SRW 600 – 1000 mm The information in the application diagram refers to the glass weight in kg/m 1 mm / m glass thickness = 2.5 kg = Impermissible application range = Additional scissor stay required Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 28: Nt Power Hinge (Timber)
(= 32 mm glass thickness) 90 kg/m (= 36 mm glass thickness) 100 kg/m (= 40 mm glass thickness) 1 mm / m glass thickness = 2.5 kg Installation of a turn-restrictor, bottom, from 160 kg. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 29: Nt Designo (Timber, Pvc)
The information in the application diagram refers to the SRW 600 – 1000 mm glass weight in kg / m 1 mm / m glass thickness = 2.5 kg = Impermissible application range Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 30 July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 31: Explanation On The Hardware Overview Chapter
For all other Tilt&Turn hardware components 1401 – 1600 600 CON 1 V 337711 refer to: 296854 CTL_7_EN 10 mm clearance * Can be found on www.roto-frank.com Corner drive 566650 Corner drive, T&T 614456 Multipart centre lock, bottom horizontal SRW / mm Size Material no.
Page 32: Nt Hinge Side K (Pvc) - Turn-Only And Tilt&Turn Hardware
Hardware overview NT hinge side K (PVC) – Turn-Only and Tilt&Turn hardware Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 33 1401 – 1600 600 CON 1 V 337711 refer to: 296854   CTL_7_EN 10 mm clearance * Can be found on www.roto-frank.com Corner drive 566650 Corner drive, T&T 614456 Multipart centre lock, bottom horizontal SRW / mm Size Material no.
Page 34: Rc1 / Rc1 N And Rc2 (Din En 1627-1630)
Hardware overview NT hinge side K (PVC) – Turn-Only and Tilt&Turn hardware RC1 / RC1 N and RC2 (DIN EN 1627–1630) July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 35 296853 1201 – 1400 600 CON 1 V 337711   CTL_7_EN 296854 * Can be found on www.roto-frank.com 10 mm clearance Corner drive 566650 Corner drive, T&T 614456 Multipart centre lock, bottom horizontal SRW / mm Size Material no.
Page 36: Nt Hinge Side K (Pvc) - Turn-Only / Tilt&Turn Hardware
Hardware overview NT hinge side K (PVC) – Turn-Only / Tilt&Turn hardware Basic security without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 37 600 CON 1 V 337711 refer to: 296854   CTL_7_EN Run-up block 350402 * Can be found on www.roto-frank.com 10 mm clearance Corner drive 566650 Corner drive, T&T 614456 Multipart centre lock, bottom horizontal SRW / mm Size Material no.
Page 38: Rc1 / Rc1 N (Din En 1627-1630)
Hardware overview NT hinge side K (PVC) – Turn-Only / Tilt&Turn hardware RC1 / RC1 N (DIN EN 1627–1630) without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 39 296853 1201 – 1400 600 CON 1 V 337711   CTL_7_EN 296854 * Can be found on www.roto-frank.com Run-up block 350402 10 mm clearance Corner drive 566650 Corner drive, T&T 614456 Multipart centre lock, bottom horizontal SRW / mm Size Material no.
Page 40: Nt Hinge Side E5 (Timber) - Turn-Only And Tilt&Turn Hardware
Hardware overview NT hinge side E5 (timber) – Turn-Only and Tilt&Turn hardware Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 41 Corner drive, T&T 614456   CTL_6_EN Multipart centre lock, bottom horizontal * Can be found on www.roto-frank.com SRW / mm Size Material no. 1001 – 1600 600 CON 1 V 618553 Rebate corner hinge E5, installation dimension 39...
Page 42: Rc1 / Rc1 N And Rc2 (Din En 1627-1630)
Hardware overview NT hinge side E5 (timber) – Turn-Only and Tilt&Turn hardware RC1 / RC1 N and RC2 (DIN EN 1627–1630) July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 43 Size Material no.   CTL_6_EN 600 – 690 200 CON 1 V 618552 * Can be found on www.roto-frank.com 691 – 890 566651 891 – 1090 600 CON 1 V 618553 1091 – 1290 600 CON 1 V 618553...
Page 44: Nt Hinge Side E5 (Timber) - Turn-Only / Tilt&Turn Hardware
Hardware overview NT hinge side E5 (timber) – Turn-Only / Tilt&Turn hardware Basic security without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 45 10 mm clearance refer to: Corner drive 566650   CTL_6_EN Corner drive, T&T 614456 * Can be found on www.roto-frank.com Multipart centre lock, bottom horizontal SRW / mm Size Material no. 1001 – 1600 600 CON 1 V 618553 Run-up block...
Page 46: Rc1 / Rc1 N (Din En 1627-1630)
Hardware overview NT hinge side E5 (timber) – Turn-Only / Tilt&Turn hardware RC1 / RC1 N (DIN EN 1627–1630) without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 47 600 – 690 200 CON 1 V 618552   CTL_6_EN 691 – 890 566651 * Can be found on www.roto-frank.com 891 – 1090 600 CON 1 V 618553 1091 – 1290 600 CON 1 V 618553 200 CON 1 V 618552 1291 –...
Page 48: Nt Power Hinge (Timber) - Turn-Only And Tilt&Turn Hardware
Hardware overview NT Power Hinge (timber) – Turn-Only and Tilt&Turn hardware Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 49 566650 refer to: Corner drive, T&T 614456   CTL_6_EN Multipart centre lock, bottom horizontal * Can be found on www.roto-frank.com SRW / mm Size Material no. 1001 – 1600 600 CON 1 V 618553 Rebate corner hinge Power Hinge L 561988 System 12 / 18(20)-9...
Page 50: Nt Designo (Timber, Pvc) - Turn-Only And Tilt&Turn Hardware
Hardware overview NT Designo (timber, PVC) – Turn-Only and Tilt&Turn hardware Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 51 634705   CTL_6_EN, CTL_7_EN L 563737 Pivot rest, timber and PVC profiles, * Can be found on www.roto-frank.com axis 13 mm, rebate depth 24 mm R 563736 Profile-related components Tilt striker threshold set Eifel 13 mm 534929 1) Not required with timber profiles.
Page 52: Rc1 / Rc1 N And Rc2 (Din En 1627-1630)
Hardware overview NT Designo (timber, PVC) – Turn-Only and Tilt&Turn hardware RC1 / RC1 N and RC2 (DIN EN 1627–1630) July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 53 851 – 1000 296855 refer to: Packer 622615   CTL_6_EN, CTL_7_EN * Can be found on www.roto-frank.com Corner hinge 634705 Pivot rest, timber and PVC profiles, L 563737 axis 13 mm, rebate depth 24 mm R 563736 Profile-related components Tilt striker threshold set Eifel 13 mm...
Page 54: Nt Designo (Timber, Pvc) - Turn-Only / Tilt&Turn Hardware
Hardware overview NT Designo (timber, PVC) – Turn-Only / Tilt&Turn hardware Basic security without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 55 For all other Tilt&Turn hardware components Run-up block 350402 refer to:   CTL_6_EN, CTL_7_EN * Can be found on www.roto-frank.com Corner hinge 634705 L 563737 Pivot rest, timber and PVC profiles, axis 13 mm, rebate depth 24 mm R 563736 Profile-related components Tilt striker threshold set Eifel 13 mm...
Page 56: Rc1 / Rc1 N And Rc2 (Din En 1627-1630)
Hardware overview NT Designo (timber, PVC) – Turn-Only / Tilt&Turn hardware RC1 / RC1 N and RC2 (DIN EN 1627–1630) without centre post July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 57 Packer 622615   CTL_6_EN, CTL_7_EN Run-up block 350402 * Can be found on www.roto-frank.com Corner hinge 634705 L 563737 Pivot rest, timber and PVC profiles, axis 13 mm, rebate depth 24 mm R 563736 Profile-related components Tilt striker threshold set Eifel 13 mm...
Page 58: Eifel Tb Threshold
Parts list – Roto Eifel TB Eifel TB threshold From Eifel 40 TB to Eifel 75 TB Eifel 40 TB – ribbed cover Description Length Surface-ﬁ nish Material no. 40 TB ribbed E6 / C-0 / grey 60 m 549270 40 TB ribbed 1.18 m...
Page 59: From Eifel 80 Tb To Eifel 140 Tb
Parts list – Roto Eifel TB Eifel TB threshold From Eifel 80 TB to Eifel 140 TB Eifel 80 TB – ribbed cover Description Length Surface-ﬁ nish Material no. 80 TB ribbed E6 / C-0 / grey 60 m 548523 80 TB ribbed 1.18 m...
Page 60: From Eifel 70 Tb To Eifel 90 Tb
Parts list – Roto Eifel TB Eifel TB threshold From Eifel 70 TB to Eifel 90 TB Eifel 70 TB outward opening – ribbed cover Description Length Surface-ﬁ nish Material no. E6 / C-0 / grey 30 m 623978 70 TB – outward opening, ribbed 1.18 m...
Page 61: Threshold Brackets And Setting Post Brackets
Parts list – Roto Eifel TB Eifel TB threshold Threshold brackets and setting post brackets Pile-screwed With screwed lug Rebate-screwed Universal Contour-milled One-piece threshold bracket Threshold bracket Aluminium Pile-screwed With screwed lug Contour-milled Setting post bracket Setting post bracket Aluminium Subject to change.
Page 62: Accessories
Parts list – Roto Eifel TB Accessories Additional profiles KS-20 base profile Description Length Surface-ﬁ nish Material no. KS-20 base proﬁ le White 60 m 543809 KS-20 base proﬁ le Black 60 m 543936 KS-20 base proﬁ le Grey 60 m 543939 KS-20 base proﬁ...
Page 63 Parts list – Roto Eifel TB Accessories Additional profiles Protective profile for building phase Description Proﬁ le Length Surface-ﬁ nish Material no. Protective proﬁ le 1.18 m Black 5 pcs 550020 Protective proﬁ le 1.18 m Black 5 pcs 550022 Protective proﬁ le 1.18 m...
Page 64 Parts list – Roto Eifel TB Accessories Weather profile strip AD Product characteristics Weather profile strip made of high-quality anodised aluminium End cap optically matched in design Brush-seal mountings can be combined in four different positions Weather proﬁ le strip AD I Weather proﬁ...
Page 65 Parts list – Roto Eifel TB Accessories Weather profile strip MD Product characteristics Weather profile strip made of high-quality anodised aluminium End cap optically matched in design Brush-seal mountings can be combined in five different positions Weather proﬁ le strip MD II...
Page 66: Wind-Stop
Parts list – Roto Eifel TB Accessories Wind-stop Application range For sealing the rebate area vertically Wind-stop Installation advice When installing the wind-stop, the sash-rebate must be smoothed on the hinge side, e.g. with the Aero-stop Use optional sealing compound for optimising sealing-...
Page 67: Aero-Stop
Parts list – Roto Eifel TB Accessories Aero-stop Application range As counter bearing for the wind-stop For installation in the Euro-groove Aero-stop Seals the rebate area in interplay with wind-stop Installation advice Insert Aero-stop in the hardware groove and screw on...
Page 68: Gaskets
Parts list – Roto Eifel TB Accessories Gaskets “Amrum” gasket Description Euro-groove/FL Length Surface-ﬁ nish PQ Material no. Amrum gasket 16/10 mm Black 80 m 544947 Amrum gasket 16/12 mm Black 80 m 543439 Amrum gasket 16/10 mm 1.18 m Black 25 pcs 544948...
Page 69: Juist Construction Connection Sheeting
Parts list – Roto Eifel TB Accessories Juist construction connection sheeting Product characteristics Vapour diffusion-proof Juist construction connection sheeting Description Width Surface-finish Material no. Construction 200 mm Black 60 m 543437 connection sheeting Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 70: Nt Hinge Side K
This document excerpt does not replace the complete product documentation*. Non-com- pliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_63_EN, IMO_258_EN * Can be found on www.roto-frank.com July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 71: Sash Drillings For Threshold Application
This document excerpt does not replace the complete product documentation*. Non-com- pliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_63_EN, IMO_258_EN * Can be found on www.roto-frank.com Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 72: Nt Hinge Side E5
230713 and 230716 mat. no. 513676 Non-compliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_64_EN, IMO_258_EN * Can be found on www.roto-frank.com July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 73: Nt Power Hinge
. For safety reasons a customer check or a check in the For all further installation ITC Leinfelden is mandatory. steps refer to: Roto accepts no liability for complaints concerning the use of   IMO_68_EN, IMO_258_EN unaudited installation solutions on this page.
Page 74 . For safety reasons a customer check or a check in the For all further installation ITC Leinfelden is mandatory. steps refer to: Roto accepts no liability for complaints concerning the use of   IMO_68_EN, IMO_258_EN unaudited installation solutions on this page.
Page 75 . For safety reasons a customer check or a check in the For all further installation ITC Leinfelden is mandatory. steps refer to: Roto accepts no liability for complaints concerning the use of   IMO_68_EN, IMO_258_EN unaudited installation solutions on this page.
Page 76: Nt Designo
This document excerpt does not replace the complete product documentation*. Non-com- pliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_109_EN, IMO_110_EN, IMO_258_EN * Can be found on www.roto-frank.com July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 77: Hinging The Sash
This document excerpt does not replace the complete product documentation*. Non-com- pliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_109_EN, IMO_110_EN, IMO_258_EN * Can be found on www.roto-frank.com Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 78 This document excerpt does not replace the complete product documentation*. Non-com- pliance exempts the hardware manufacturer of his liability. For all further installation steps refer to:   IMO_109_EN, IMO_110_EN, IMO_258_EN * Can be found on www.roto-frank.com July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 79 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 80: Roto Eifel Tb
Installation Roto Eifel TB Striker receiver Installation situation for renovation Screw-in nut M5 x 10 DIN 7965 - St July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 81 Installation Roto Eifel TB Striker receiver Installation situation for renovation M5 x 20 INSTALLATION ADVICE For secure installation of the threshold, under- lay it on the entire length with suitable base profiles. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 82: Positioning Of The Frame Components - All Hinge Sides
Striker dimensions (mm) horizontal, bottom – Basic security 86.5 CLH1 LMD = Lifting mishandling device BC = Bullet catch Multipart centre lock, horizontal SRW / mm CLH1 see parts lists CL 600 Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 83 – CL 200 V RC1 / RC2 – CL 400 CON – CL 400 V – CL 600 V CL 600 CON, CL 200 (CON) 658 1062 CL 600 CON, CL 400 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 84 Centre lock, horizontal, bottom Multipart centre lock, horizontal, with/without turn-restrictor SRW / mm CLH1 SRW / mm CLH1 see parts lists CL 600 see parts lists CL 600 Basic security Basic security July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 85 CL 600 (CON) – CL 600 (CON) CL 600 CON, CL 200 (CON) CL 600 CON, CL 200 (CON) 658 1062 CL 600 CON, CL 400 658 1062 CL 600 CON, CL 400 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 86: Explanation On The Adjustment Chapter
Use a 4 mm Allen key as tool. Height adjustment Lateral adjustment Gasket-compression adjustment NOTE! Adjusting Roto hardware components may only be carried out by authorised and qualified personnel. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 87: Locking Cam
±0.2 mm 0 = Original position 90° 90° – ±0.4 mm 180° 180° – 0.8 mm max. adjustment ±0.8 mm ±0.6 mm + 0.8 mm max. adjustment 270° 270° – ±0.8 mm 360° 360° Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 88: Operating Information
Handle position Sash position Symbol Meaning Closed position of the sash Opened turn position of the sash Opened tilt position of the sash Malpositioning of the sash July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 89: Operation Information For End-Users
The following symbols and signs can by used on windows and balcony doors to protect the end-user. Please order stickers separately (OPR_14_DE-EN). Drehkipp-Beschlag Tilt&Turn hardware geschlossen closed öffnen open kippen tilt Fehlschaltungen vermeiden Avoid mishandling mode! 08/2012 OPR_14_DE-EN_v1 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 90: Troubleshooting
– = Not to be carried out by the end-user; the end-user may not carry out installation work! = To be carried out either by a specialist company or by the end-user. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 91 Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 92: Maintenance
The hardware overview shows the arrangement of the lubrication points, but does not necessarily correspond to the installed hardware. The number of lubrication points depends on the size and design of the window. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 93: Lubrication Points
Maintenance Lubrication points Grease Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 94: Inspection And Care
The window and balcony door manufacturer must draw builders and end-user’s particular attention to these maintenance instructions. Roto Frank AG recommends window fabricators to make maintenance agreements with their end-users.
Page 95: Preservation Of The Surface Finish
– = Not to be carried out by the end-user; the end-user may not carry out installation work! = To be carried out either by a specialist company or by the end-user. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 96 – = Not to be carried out by the end-user; the end-user may not carry out installation work! = To be carried out either by a specialist company or by the end-user. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 97: Unhinging The Sash
Press down the lifting mishandling device (if mounted) and bring the handle into the turn position. Turn the sash closed. Lift the sash slightly tilted out of the pivot rest. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 98: Transport, Packaging, Storage
Always choose the force application points so that the resulting reaction forces are dissipated appropriate to the designed layout of the hardware components for the intended installation location . This applies particularly for the hinge positions. July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 99: Transport Inspection
Check the delivery on receipt immediately for completeness and transport damage. NOTE! Claim any damage as soon as it is detected. Claims for damage can only be invoked within the statutory reclamation period. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 100 July 2014 IMO_347_EN_v0 Roto NT Subject to change.
Page 101: Disposal Of Window Hardware
Disposal Disposal of window hardware Separate the hardware components from the window and dispose of as metal scrap. Subject to change. Roto NT IMO_347_EN_v0 July 2014...
Page 104 Roto Frank AG Window and Door Technology Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen Germany Phone +49 711 7598 0 +49 711 7598 253 info@roto-frank.com www.roto-frank.com From a single source: Optimum hardware systems to meet all challenges Roto Tilt&Turn The Tilt&Turn hardware system for windows and balcony doors Roto Sliding |...

This manual is also suitable for:

Nt designo Nt hinge side k Nt hinge side e5 Nt power hinge

Roto NT Series Installation, Maintenance And Operation Instructions

Information on These Instructions

Responsibility of the Target Groups

Instruction Obligation of the Target Groups

Explanation of the Safety Instruction Symbols

Limitation of Liability

Stipulated Use

Stipulated Application for End-Users

Safety Instructions

Safety Information for End-Users

Fabrication Advice for Timber and PVC

Screw Fixing

Eifel TB Threshold

Dimensional Data for Hardware

General Hardware Characteristics

Application Diagram

Explanation on the Hardware Overview Chapter

NT Hinge Side K (PVC) - Turn-Only and Tilt&Turn Hardware

NT Hinge Side K (PVC) - Turn-Only / Tilt&Turn Hardware

NT Hinge Side E5 (Timber) - Turn-Only and Tilt&Turn Hardware

NT Hinge Side E5 (Timber) - Turn-Only / Tilt&Turn Hardware

NT Power Hinge (Timber) - Turn-Only and Tilt&Turn Hardware

NT Designo (Timber, PVC) - Turn-Only and Tilt&Turn Hardware

NT Designo (Timber, PVC) - Turn-Only / Tilt&Turn Hardware

Eifel TB Threshold

Accessories

NT Hinge Side K

NT Hinge Side E5

NT Power Hinge

NT Designo

Roto Eifel TB

Positioning of the Frame Components - All Hinge Sides

Explanation on the Adjustment Chapter

Locking Cam

Operating Information

Operation Information for End-Users

Troubleshooting

Maintenance

Lubrication Points

Inspection and Care

Preservation of the Surface Finish

Unhinging the Sash

Transport, Packaging, Storage

Transport Inspection

Disposal of Window Hardware

Quick Links

Need help?

Questions and answers

Summary of Contents for Roto NT Series

This manual is also suitable for:

Table of Contents