Table of Contents
Advertisement
Quick Links
Deuce
Applicable for Deuce 75 MPH (DC799) & 95 MPH (DC899)
www.HeaterSports.com
Model No's. DC799/DC899
Serial No.
Write the serial number in the
space above for reference.
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty, call
1-800-492-9334
CUSTOMER CARE
For customer service inquiries,
please call our toll free line
at 1-800-492-9334.
CAUTION
Read all precautions and in-
structions in this manual be-
fore using this product. Keep
this manual for
future reference.
Instructions Date: 08/2020
Version: 00001
DO NOT RETURN TO STORE, CALL 1-800-492-9334
OWNER'S MANUAL
Dual Wheel Pitching Machines
®
Advertisement
Table of Contents
Related Manuals for Heater Sports Deuce DC799
Summary of Contents for Heater Sports Deuce DC799
- Page 1 OWNER'S MANUAL Deuce Dual Wheel Pitching Machines ® Applicable for Deuce 75 MPH (DC799) & 95 MPH (DC899) www.HeaterSports.com Model No’s. DC799/DC899 Serial No. Write the serial number in the space above for reference. ACTIVATE YOUR WARRANTY To register your product and activate your warranty, call 1-800-492-9334 CUSTOMER CARE...
-
Page 2: Read Before Operating
HOWEVER, THE ACCURACY OF THE DEUCE DEPENDS ON THE QUALITY, HARDNESS AND TYPE OF BALLS YOU USE IN THIS MACHINE! HEATER SPORTS RECOMMENDS USING HEATER PITCHING MACHINE BALLS IN THE DEUCE MACHINE. THESE BALLS HAVE BEEN PRECISELY CRAFTED TO PROVIDE YOU WITH HOURS OF ACCURATE, TROUBLE FREE BATTING AND FIELDING PRACTICE. - Page 3 PARTS *Replacement Parts Available by Calling Heater Sports Tripod (B) Leg Assembly (9 Total) Housing (A) Bottom Leg (C): 3x Middle Leg (D): 3x Top Leg (E): 3x Ballfeeder: Motor Section (F) Ballfeeder: Middle Section (G) Ballfeeder: End Section (H)
-
Page 4: Housing Assembly
HOUSING ASSEMBLY Front of Housing Silver Head Bolt (I) Flat Washer (L) Plastic Washer (M) x2 Silver Locknut Tripod (B) STEP 1: Slide the Tripod Bracket (B) over STEP 2: Place 2 Black Washers (M) the U-shape arms of housing and align between the housing and tripod, then bolt holes. -
Page 5: Leg Assembly
LEG ASSEMBLY STEP 1: Slide leg sections together (See illustration). Lock the sections together by making sure the push pins line-up with each adjoining hole and lock into place. Top Section E Middle Section D Bottom Section C Follow Step 1 to assemble all three legs for the pitching machine. (There will be 9 leg sections) After assembling Pivot Arm and Housing, slide the 3 leg sections into the Tripod Bracket Leg Supports and secure with the Thumbscrews (Part Q). -
Page 6: Pre-Operation
PRE-OPERATION Check The Air Pressure In Your Pitching Machine Tires & Check That The Black Hub & Tire Lines Align. WARNING: MAKE SURE MACHINE IS UNPLUGGED AND THE TIRES ARE NOT SPINNING DURING THESE OPERATIONS! Pre-Operation #1 Locate Allen Wrench (provided in package) and unscrew (3) three wheel cover screws for each wheel. -
Page 7: Operation
OPERATION CAUTION! USE HEATER PITCHING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. PITCHING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL. IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY! Step 1:... - Page 8 CURVE BALL PITCHES. DIAL SETTINGS FOR VARIOUS PITCHES Use the following diagrams as guides for using any Heater Sports Two Wheel Pitching Machine. Each diagram shows the approximate angle of the machine head. Numbers represent the dial setting as seen on the 0-10 knobs.
- Page 9 We recommend each operator of the pitching machine spend at least 10 hours ad- justing the speed and angle settings of the pitching machine. The operator may even take note of speed settings and angles for future reference. We urge each operator to experiment with many speed settings and angles. While adjusting speed and angle settings, we recommend using a wide backstop with no person or object in the ball path while experimenting with many settings.
- Page 10 WARNING! WARNING! • Do not put hands or • Heater pitching machine fingers in pitching machine. balls are the most accurate • Make sure all persons are balls for use in the Deuce clear of the ball path and away Machine. Real leather balls from pitching machine before can be used but aren’t as pitching any ball. accurate because of the ball • Make sure you pitch only seams. Batter should be aware one ball at a time. at all times. • Make sure all balls are • Always have legs set on the out of machine before turn- ground before pitching to a ing the pitching machine on. batter or the Deuce • Do not stand in front of Pitching Machine may move pitching machine. and hit the batter causing • Do not operate in moisture. serious physical injury. • Batter must wear NOCSAE • Make sure you pitch only Approved Batting Helmet.
Need help?
Do you have a question about the Deuce DC799 and is the answer not in the manual?
Questions and answers
Greetings, I would like to know running wattage and starting wattage, please. Thank you.