Advertisement
Hotec UHF Wireless Headset/Lavalier Microphone System
USER MANUAL
Model: H-U05/H-U25
H-U25
H-U05
Thanks for purchasing Hotec Wireless Headset/Lavalier Microphone System, please read the
following instructions carefully before use.
Email:
support@sz-tecson.com
Website: www.sz-tecson.com
Facebook page:
https://www.facebook.com/Hotechome/
Or scan the QR code
Hotec
®
is the registered trademark of Shenzhen Tecson Trade and Technology Co., Ltd.
1
Advertisement
Table of Contents
Related Manuals for Tecson Hotec H-U05
Summary of Contents for Tecson Hotec H-U05
- Page 1 Thanks for purchasing Hotec Wireless Headset/Lavalier Microphone System, please read the following instructions carefully before use. Email: support@sz-tecson.com Website: www.sz-tecson.com Facebook page: https://www.facebook.com/Hotechome/ Or scan the QR code Hotec ® is the registered trademark of Shenzhen Tecson Trade and Technology Co., Ltd.
-
Page 2: Product Introduction
Product Introduction Hotec UHF Wireless Lapel/Lavalier and Headset Microphone system is designed for amplifying voice through speakers, karaoke machines, amplifiers, mixers for DJ, church, wedding, lecturers where hands free are needed, or for recording on phones, cameras, tablets, computers or live performances. Both the mini receiver and the bodypack transmitters are powered by rechargeable batteries. -
Page 3: Power Button
channel A is connected, it is Green; when Channel B is connected, it is Blue; when both channel A and channel B are connected, it is green-blue. Charging Status indicator: This will be Red during charging. When the battery is fully ⑤... -
Page 4: Preparation Before Use
Unplug the charger after the battery is fully charged. Preparation before use 1. Charge the mini receiver and transmitter(s). Charging time is about 2 hours. 2. Choose the right microphone and screw it into the mic hole of the transmitter. Make sure it is plugged in tightly. - Page 5 Note 2: If you would like to sing karaoke on phone or monitor the recording, connect the headphone splitter (NOT included in the box) with your phone. Plug the TS to TRRS cable to the mic jack of the headphone splitter and the headphone into the headphone jack. See Figure 3.
-
Page 6: Product Specification
Figure 5 Figure 6 Note: The computer recognizes the microphone automatically after the receiver is connected correctly as shown above. If not, go to Control Panel/Sound/Recording, click the external microphone and go to Configuration. If you need any assistance in setting up, please contact Hotec customer service. -
Page 7: Troubleshooting
MINI RECEIVER Product Dimension 1.66 * 1.22 * 0.78 inch Power Supply Built-in rechargeable battery Power Consumption 80mA Working Hour For H-U05, up to 6 hours after fully charged For H-U25, up to 4 hours after fully charged Power Capacity 650mAh Charging Time About 2 hour (5V/1A) - Page 8 3. Please do not disassemble the product unless you get professional instructions from the manufacturer. 4. We do not recommend to use this product on small portable Bluetooth speakers. Manufactured by Shenzhen Tecson Trade & Technology Co., Ltd. Customer service e-mail: support@sz-tecson.com...
Need help?
Do you have a question about the Hotec H-U05 and is the answer not in the manual?
Questions and answers
How to pair up blue tooth micra phone to JYX speaker
To pair the Tecson Hotec H-U05 microphone to a JYX speaker, follow these steps:
1. Check Compatibility: Make sure the JYX speaker has a 1/4” mic input jack and mic volume control.
2. Connect the Receiver:
- Plug the mini receiver into the 1/4” mic input of the JYX speaker.
3. Set Volume:
- Turn the speaker’s microphone volume to minimum before plugging in to avoid feedback.
4. Power On Devices:
- Turn on both the bodypack transmitter (microphone) and the receiver.
5. Check RF Indicator:
- When the RF indicator shows the correct color (Green for both CHA and CHB connected), the pairing is successful.
6. Adjust Volume:
- Use the microphone’s volume up/down buttons to adjust the mic volume as needed.
Note: This microphone system uses a wireless receiver, not Bluetooth, for connection.
This answer is automatically generated