Advertisement
4.7.
Hold Button
4.7.1.
The data Hold function allows the meter to "freeze" a measurement for later reference
4.7.2.
Press the "dATA Hold" button to "freeze" the display, the "Hold" indicator will appear.
4.7.3.
Press the "dATA Hold" button to return to normal operation.
4.8..
flasHligHt
Press and hold the top button to turn the flashlight on. Release the button to turn the flashlight off.
4.9.
auto PoWer off
The auto off feature will turn the meter off after 15 minutes.
5. maintenanCe
Warning! To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery
‰
or fuse covers.
5.1.
rePlaCing tHe Battery
5.1.1.
Remove the bottom cover and secure the screw.
5.1.2.
Replace old battery with two 1.5V AAA type batteries.
5.1.3.
Replace the bottom cover and secure with the screw.
5.2.
rePlaCing tHe fuse
5.2.1.
disconnect the test leads from the meter.
5.2.2.
Remove the test leads holder and top cover by removing screw.
5.2.3.
Pull out the pcb lift the centre circuit board straight up from the connectors to gain access to the fuse holders.
5.2.4.
Remove the old fuse and install the new fuse into the holder. (Always use the correct size of fuse).
5.2.5.
Align the board with the connects and gently press into place.
5.2.6.
Replace and secure the cover.
Warning! To avoid electric shock, do not use meter unless all covers are in place
‰
enVironment ProteCtion
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Battery remoVal see seCtion 5
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey ltd Batteries Producer Registration number (BPRn) is BPRn00705.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson Way, suffolk Business Park, Bury st edmunds, suffolk. iP32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
mM102.|.Issue.2.(F).28/03/18
Advertisement
