Troubleshooting - Lumie brazil Manual

Troubleshooting

Troubleshooting
The light is less bright or doesn't come on at all
•
One or more of the bulbs may have failed. Switch off and unplug the
unit. Let it cool if necessary.
•
Insert a coin or something similar into the slot at the top centre of the
plastic screen and prise it away from the case. Detach from the sides
and unhook the screen at the bottom.
•
Check that the bulbs are firmly in the sockets. If you need to adjust
them, plug in the unit and switch on afterwards to see if this has
worked.
•
To replace the screen, hook the bottom edge first and push the top
and sides to click it back into position.
The bulbs are firmly in place but it hasn't fixed the problem
•
If none of the bulbs are working, check the fuses (see below). If the
fuses are OK, then you may need to replace the bulbs.
•
To remove a bulb, push the red button down hard and slide the bulb
out of the socket.
•
Gently slide the replacement bulb into the socket until it clicks into
position.
I've replaced the bulbs but it's still not working
•
Check the internal fuses on each side of the on/off switch - it will be
obvious if either has blown. Replace with a 5x0mm cartridge fuse,
type F3.15AL50V.
•
It is also possible that the plug fuse might have blown. Replace with a
3A fuse to BS136.
If this doesn't work or if you have any other problems with your Brazil,
please call Lumie.
ENG 7