Advertisement
Unpack the product and check contents. Should there be any damaged or missing parts contact your supplier immediately.
4.1.
Wind the knurled thumb nut (item 2) on to the threaded yoke (item 1) with knurled shoulder uppermost as in fig.1.
4.2.
Look for the keyway slot in threaded yoke and align with the tapped hole in end of load beam (item 3).
4.3.
Screw the cap screw in toward the threaded yoke keyway slot without clamping. This screw keeps the yoke 'v' on the axis of the beam.
5. OPERATION
5.1.
Remove trolley jack saddle from jack and the rubber pad from the saddle.
5.2.
Place the assembled beam as shown in fig.1 on to the jack spigot hole.
5.3.
Position the assembly beneath the vehicle axle as fig.2. Keeping the
beam horizontal, jack the saddle up to the differential casing. Adjust yoke
height to engage with back axle housing for smooth lifting.
5.4.
Raise vehicle to required height and immediately position axle stands to
support vehicle during servicing. (See safety instructions)
5.5.
Lower the vehicle by method 5.3. Remove axle stands and lower.
5.6.
After use, clean with a lightly oiled cloth with attention to M30 thread.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, dispose of it according to local regulation
NOTE: It is our policy to improve products continually and as such we reserve the right to alter data, specifications and component parts without
prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
fig.2
s.
01284 757500
01284 703534
X137
www.sealey.co.uk
sales@sealey.co.uk
Issue: 3 (I) - 10/04/17
Advertisement
