Lutron Electronics SeeTouch QS Series Replacement Instructions

Important Notes:

Please Read Before Installation
1. Ensure all controls are correctly wired and mounted
before installing faceplates.
2. Ensure yokes of controls are free from debris (e.g.
plaster, spackling compound) before installing
faceplate adapter and faceplate.

Cleaning Instructions

To clean, wipe with a clean damp cloth. DO NOT use
any chemical cleaning solutions.

Installation

1. Remove the currently installed faceplate, adapter, and
buttons.
a. Snap off the faceplate.
b. Remove 2 screws from the faceplate adapter and
remove adapter (if present).
c. Remove button assembly from keypad by gently
prying it from the top.
Removing the faceplate adapter is required for insert
models or if the new faceplate kit is a different color
than the one being removed.
2. Snap on the buttons by lining up the two tabs on the
bottom of the buttons with the two slots in the keypad
just above the lower keypad mounting screw. Using
your thumbs, press in the bottom, and then snap in
the top of the buttons.
3. Attach faceplate adapter to controls with screws
provided.
4. Attach the faceplate to the faceplate adapter by
pressing at the top and bottom of the faceplate until it
snaps into place.
R
Replacement Instructions
QSWS2R Faceplate Kits
QSWS2B Button Kits
a. Snap off faceplate
b. Remove screws and faceplate adapter
(if present)
c. Gently pry out buttons
Buttons
Adapter
Faceplate