Taking Motion Pictures - Panasonic CF-19 Series Supplementary Instructions Manual

Taking Motion Pictures

Taking Motion Pictures
1
Start recording into the buffer.
Click [Capture] - [Start Capture].
2
Finish recording into the buffer.
Click [Capture] - [Stop Capture].
3
Save the buffer as a motion picture.
1 Click [Capture] - [Save Captured Video].
2 Specify the destination to save and fi le name, and then click [Open].
"Save File Progress: XX%" is displayed on the status bar. You cannot capture a new
motion picture until saving is complete. Do not close this software while saving.
NOTE
You cannot use Zoom In, Pan and Time stamp functions.
If you rotate the display, pictures are not correctly displayed. Do not rotate the dis-
play for use.(
When the distance between the camera and subject is less than 60 cm {23.62"}, the
focus may not be aligned due to the capability of camera.
If you specify the externally-connected recording device as a destination to save, software
operation may become slow. In this case, specify the internal disk as the destination to save.
Specifying the Destination to Save the Buffer and File Size
You can specify the destination to save the buffer and fi le size before recording.
1
Click [Capture] - [Set Capture File].
2
Specify the destination to save and fi le name, and then click [Open].
3
Specify the fi le size in [Set File Size] to secure in the hard
disk beforehand, and then click [OK].
NOTE
You can record over the fi le size specifi ed, but jumpiness may occur for the excess
of the fi le size during playback.
12
Reference Manual "Display Rotation")