Installing The Stands - Onn Roku TV 100021261 Quick Start Manual

What's in the box?
TM
2 x AAA Batteries
TV Remote
What you need:
Phillips Head Wireless
Router
Screwdriver
(needed for
streaming)
Check to make sure you
have everything below.
TV Stand 4 Screws
Power cord
for Remote
Computer, Internet
Connection
Tablet, or
(needed for
Smartphone
streaming)
(needed for setup)

Installing the Stands

Do not install the stands if you are wall
mounting your TV. See your wall mount
instructions.*
You will need: Phillips screwdriver (not included)
1 . Place the TV screen-down on a clean, flat,
soft surface (ie: blanket) to prevent scratches
or damage to the screen.
2 . Use a Phillips screwdriver to attach each
stand with the provided screws.
3 . Place the TV upright on a stable, level
surface.
* Make sure the tilt angle between the TV screen and the vertical surface
is no more than 15 degrees.
01