S2 Configuration (Station Module: Single Configuration); Basic Configuration - Toshiba V Series User Manual

1.1 S2 Configuration (Station Module: Single Configuration)

1.1.1

Basic configuration

The single system is configured only with the basic unit, or with the basic unit plus
expansion unit(s) depending on the parallel I/O module (hereinafter called the I/O module
or G2 I/O module) of model 2000.
The basic unit is composed of a power supply module, station module including the
controller, and I/O module. To expand the unit, an expansion interface is required.
S2PU82 or S2PU72A can be used as the controller.
The expansion unit is composed of a power supply module, I/O module and expansion
interface.
The expansion interface is connected with an expansion cable.
The maximum configuration is the 4-unit configuration.
In model 2000, the bus controlling the parallel I/O is called the G2 I/O bus.
power supply module
expansion
interface
expansion cable
power supply module
expansion
interface
Figure 1-1 Basic S2 configuration (station module: single system configuration)
6F8C0836
*4
~
*4: The digital / analog I/O modules can be mounted in the *4 slots in place of the station modules.
1.1 S2 Configuration (Station Module: Single Configuration)
station modules
*4 *4 *4
space module
Basic unit
main base
direct I/O modules
Expansion unit
expansion
base
direct I/O modules
3
1