Table of Contents
Advertisement
Chapter 4
Audio Connect (Two way Bluetooth)
Application Guide
Audio Connect is a directional application for audio
transmission. It supports the setting of two working
modes. The first mode is to push audio from the TV
to the audio peripheral. The second mode is to push
audio to the TV from a Bluetooth playback device
(such as a mobile phone). In the initial state, the default
mode is mode one. The following describes how
to use the two working modes.
Mode 1: The TV sends audio to the audio peripherals
Step 1: Click on the homepage Apps to lauch Audio
Connect App, as shown below Figure 1：
Figure 1
Step 2：Click [TV to Bluetooth Speaker], if the TV is already
in the current mode, it will jump to the search Bluetooth
device interface. At this time, you can search for nearby
Bluetooth audio peripherals, and click Connect,
as shown below Figure 2：
Figure 2
If TV is in Mode 2 above, at this time, click [TV to Bluetooth
Speaker] to pop up a prompt dialog, Click Yes again to jump
to the above Figure 2, as shown below Figure 3：
Figure 3
In the mode, after successfully connecting with peripheral
devices such as Bluetooth audio, when the TV side plays
audio and video, audio will be output through the peripheral
device.
Mode 2: Bluetooth playback device pushes audio to the TV.
Step 1：Start the App according to Step 1 in the above
mode 1, If the TV is in the mode at this time, select and click
the [SmartPhone to TV] button to pop up a prompt dialog,
as shown below Figure 4：
Step 2：Click Yes in the Step 1 prompt dialog, it will switch
to mode two, and jump to something like the figure below
Figure 5：
Step 3：Open the list of handheld devices, as shown below
Figure 6：
18
Using your TV
Figure 4
Figure 5
Figure 6
Advertisement
Table of Contents
