Philips 9000 Series Guidance page 40

6 Clean the cutter and guard under the tap.
7 Shake off excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head
holder.
10 Place the retaining ring on the shaving head.
1
2
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn
the ring clockwise until it clicks to indicate that
the ring is fixed.
12 Attach the shaving head holder to the bottom
part of the shaving unit ('click').
39
English