Outbound Signaling Using The Quicklist - Motorola MCC 7500 Operator Flipbook

OUTBOUND SIGNALING USING THE QUICKLIST

The QuickList is used to specify the desired radio to establish
a communication link. The QuickList provides two modes to
select a radio, by Unit Alias, and by manually entering the
Unit ID. The modes are toggled by pressing the 1-9/A-Z
button in the QuickList.
Selection by Unit Alias:
1. Press the Send button to transmit the corresponding
signaling feature with which the QuickList is associated.
Selection by Unit ID:
1. Press the numbered buttons to specify the Unit ID of the
radio you are going to signal.
2. Press the Send button to transmit the corresponding
signaling feature with which the QuickList is associated.
MCC 7500 Dispatch Console Elite Operator Flipbook
22