To avoid any potential risk of electrical shock or damage do not disassemble or modify the NeoViu D1. Please keep the NeoViu D1 away from any heat sources to avoid damage. The device should be keep in a dry and well-ventilated area away from dust...
Hardware Structure ● Front Panel Back Panel ● Front Panel ● Rear Panel Micro-USB Power indicator HDMI Reset (For power supply) ● Left Side Panel ● Right Side Panel 4 / 8...
Remote Control Google Search Standby On/Off Enter/Confirm Up /down direction key L/R direction key HOME page APPS Back/Exit Volume + Volume— Open Netflix Open Prime Video Projector setting Instructions Indicator Light: Press any key and indicator light flashes [Note] The indicator light will flash quickly when the remote batteries are low.
Step2 Connection with Power Use the power adapter to connect the NeoViu D1 and TV. Plug the power adapter into A/C outlet. If TV has a powered USB port, it can also plug the micro-USB cable directly into the Stick port.
The power cord is not connected or the ensure the voltage of the socket is powered on outlet is not powered. normal. Please press mute button to restore NeoViu D1 in MUTE state TV with images without volume Voice Volume is too low Turn up the volume...
Page 8
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.