2-12
Message List
2-12-1
Error messages
The following error messages involving the Ethernet system have been added.
Message
Cause
ERROR
MESSAGE
No. 38
Solution
2-12-2
Telnet message list
Message
Meaning
Response
Message
Meaning
Response
Message
Meaning
Response
Message
Meaning
Response
Message
Meaning
Response
Message
Meaning
Response
net link error
• TELNET connection terminated due to error.
• A TELNET dedicated parameter is set so as to stop operation during
logout processing.
• To end the TELNET communication use a LOGOUT or BYE
command.
• Make setting with a TELNET dedicated parameter so as to continue
operation during logout processing.
login:
Request for entry of login user name.
Enter user name.
Password:
Request for entry of login password.
Enter login password.
login incorrect.
Error was found during login check.
Enter the correct user name and password.
TELNET is disconnected!!
Login check was made 3 times but errors were found so connection
was cutoff.
Enter the correct user name and password.
telnet is already used!!
A TELNET connection has already been made.
Limit the number of simultaneous logins to 1.
timeout.
Continuous communication time exceeded the time set on the TELNET
parameter timeout (time).
Set a larger timeout (time) on the TELNET parameter so communication
time does not exceed the timeout.
31
CHAPTER2 Ethernet Unit