Inserting The Effect Wheel - Optikinetics Opti Aura Product Manual

Aura

Inserting the Effect Wheel

Bossed Push On Effect Wheels
For this projector Optikinetics recommends that customers use
magnetic wheels. The
push on wheels. To use these wheels you will be required to remove
the magnetic adapter from the projector. To do this, use the small allen
key provided and place this in the hole on top of the magnetic adapter.
Twist the allen key counter-clockwise and the adapter will loosen and
detatch from the projector.
To reattach the magnetic adapter, make sure that the at of the shaft is
facing the top of the projector. Place the magnetic adaptor onto the
shaft and twist the allen key clockwise in the hole on the magnetic
adaptor. The adaptor will subsequently tighten and attach to the
projector.
3
[OPTI]
Designed and Manufactured in the UK by Optikinetics
Position the magnetic wheel onto the
magnetic adaptor on the projector.
To remove the wheel simply lift it off.
Aura does also allow the use of bossed
Note:
You may have to turn on the projector
to move the rotator. The hole on the
top of the magnetic adaptor must
face the top of the projector.