Related Manuals for Ametek LAND UNO
Summary of Contents for Ametek LAND UNO
- Page 1 Target Orbiting Thermometer User Supplement User Supplement Issue 5 13 March 2017 Publication Nº 198.176 Language: English © Land Instruments International, 2008-2017...
- Page 2 IMPORTANT INFORMATION - PLEASE READ Health and Safety Information Read all of the instructions in this booklet - including all the WARNINGS and CAUTIONS - before using this product. If there is any instruction which you do not understand, DO NOT USE THE PRODUCT.
- Page 3 Web: www.landinst.com For further details on all AMETEK Land offices, distributors and representatives, please visit our websites. Return of Damaged Goods IMPORTANT If any item has been damaged in transit, this should be reported to the carrier and to the supplier immediately.
- Page 4 Target Orbiting Thermometer User Supplement...
-
Page 5: Table Of Contents
User Supplement Target Orbiting Thermometer Contents About this Supplement UNO Target Orbiting Thermometers Supplementary Specification Principle of Operation Suggested settings for use in 'Peak Picker' mode... - Page 6 Target Orbiting Thermometer User Supplement Accuracy Accuracy for a ‘standard‘ UNO U1 Thermometer = ±0.4%K Accuracy for a ‘Target Orbiter’ UNO U1 Thermometer = ±0.8%K Accuracy for a ‘standard‘ UNO U2 Thermometer = ±0.25%K + 1K Accuracy for a ‘Target Orbiter’ UNO U2 Thermometer = ±0.5%K + 1K Specification ±°C Temperature °C...
-
Page 7: About This Supplement
User Supplement Target Orbiting Thermometer About this Supplement This supplement is gives the information necessary to understand the principle of operation of the Target Orbiting (TO) option fitted to your UNO Thermometer. This supplement must be used in conjunction with the UNO Thermometer User Guide, supplied as standard with all UNO Thermometers. - Page 8 Target Orbiting Thermometer User Supplement d = target spot diameter ≤ D/100 (D/200 for high temperature versions) Optical Field of View (=D/d) Fig. 1 Field of view of Standard UNO Thermometer S4980253 d = target spot diameter (identical to a 'standard' thermometer) rad = D/29 Optical Field of View (=D/d) Fig.
-
Page 9: Principle Of Operation
User Supplement Target Orbiting Thermometer Principle of Operation Fig. 1 shows the field of view for a standard UNO Thermometer. The axis of the field of view is fixed at the centre of the thermometer lens and is at right angles to the front face of the thermometer. -
Page 10: Suggested Settings For Use In 'Peak Picker' Mode
Target Orbiting Thermometer User Supplement The target width required for accurate temperature measurement (>99.5% of value) with the Target Orbiting Thermometer is as follows: Thermometer Field of View Minimum target required U1 600/1600 CV - TO 100:1 1.2 x target spot diameter U1 600/1600 CS 100:1 1.2 x target spot diameter... - Page 11 PRODUCT WARRANTY Thank you for purchasing your new product from Land Instruments International. This Land manufacturer’s ‘back-to-base’ warranty covers product malfunctions arising from defects in design or manufacture. The warranty period commences on the instrument despatch date from the Land Instruments International Ltd.
- Page 12 • Tel: +44 (0) 1246 417691 • Fax: +44 (0) 1246 410585 Email: land.enquiry@ametek.com • www.landinst.com A M E T E K L a n d , I n c . • 1 5 0 F r e e p o r t R d .
Need help?
Do you have a question about the LAND UNO and is the answer not in the manual?
Questions and answers