Before Recording; Cd Synchronized Recording; Dubbing Setting - Yamaha CRX-E500 Owner's Manual

Yamaha receiver/cd player owner's manual
Hide thumbs Also See for CRX-E500:
Table of Contents

Advertisement

SYSTEM CONTROL

Before recording

When you record by using MDX-E300 or KX-E300, you
must first make the connections as shown in "Connecting
the system" on page 6. For details, refer to the instructions
supplied with the MDX-E300 or KX-E300. A source from
the component which is connected to the AUX terminal
component can be recorded on a tape or MD.
CD synchronized
recording
You can start and stop recording a CD on a MD or a tape
by pressing just one button.
D
^
&
PRESET
MD
CD
MD
MD
REC/PAUSE
REC/PAUSE
MODE
SLEEP
VOLUME
1
Press CD.
2
Press MD REC/PAUSE to record on a MD or
TAPE REC/PAUSE to record on a tape.
3
Press ^.
Recording starts automatically on MDX-E300 or
KX-E300.
To stop recording
Press &.
• Pressing & on CDC-E500 stops CD play and turn the
recording component into "REC standby" mode.
• Pressing & on MDX-E300 or KX-E300 stops recording,
while the CD player keeps on playing.
Note
• Recording does not pause while CDC-E500 changes discs.
When recording the tracks of different discs, it is
recommended to set the CD player to single disc play mode
and record the discs individually. When recording the
programmed sequence of the tracks of different discs, make
sure that the length of the MD or the tape is longer than the
total play time of the programmed tracks, so that it is enough
to cover the time for changing discs.
22
E
TAPE
DIRECTION
TUNER
PRESET
CD
TAPE
AUX
TAPE
REC/PAUSE
TAPE
REC/PAUSE
DUBBING
START
DISPLAY

Dubbing setting

There are six different combinations of components. Once
you choose a certain mode, recording starts and ends
automatically in a certain way for each mode.
MD
REC/PAUSE
MODE
DUBBING
MODE
SLEEP
VOLUME
1
Decide the combination of the components. Each
time you press DUBBING MODE, the mode will
change in the below order.
1
• Recording automatically starts from the beginning
of the tape. (By pressing DUBBING START, the
tape automatically rewinds to the beginning if it is
in the middle.)
• When the recording on side A finishes while a
track is being played back, the recording on side B
starts from the beginning of the same track.
• The sound is automatically faded out when it gets
close to the end of side B.
2
3
Play unit
• Same as CD = TAPE
AUX
TAPE
REC/PAUSE
DUBBING
START
DUBBING
START
DISPLAY
Record unit

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-e400Cdc-e500

Table of Contents