Changing The Master Code; Master Code Guidelines - Schulte-Schlagbaum SAFE-O-TRONIC access LS101 Manual

Manual

Changing the Master Code

If your Master Code has wound up in unauthorised hands, you should change the Master Code
straight away.
It is also possible to use different Master Codes for different areas in your locking system. As a
result, one master code can be used to set parent locking permissions.
Press the OK and Abort keys at the same time
►
Enter the active Master Code
►
Press the OK and Abort keys at the same time
►
Enter a new Master Code
►
Press the OK key
►
Enter the new Master Code again
►
Press the OK key
►
Note
This guide only uses example PIN codes.
Please use your own PIN codes for your locking system.
Note
If you have forgotten the Master Code, a Master Reset is required. In this case, please
contact our support.

Master Code guidelines

You can choose any Master Code for your system. The following Master Code guidelines must be
followed:

At least 5 digits

Minimum 'User PIN length' +1

Maximum of 9 digits

Always complete your Master Code input by pressing the OK key
Schulte-Schlagbaum AG
3
4
4
Page 9 of 39
&
9 7
5 1
&
2
8 7 3
2
8 3
7
LS(W)101_6-703-2 30R1 4_EN.DOCX
LS101 / LSW101