Configuring The Ethernet Card For Novell Netware; Using The Ethernet Card In Print Server Mode - Epson EPL-N2000 User Manual

Configuring the Ethernet Card for Novell NetWare

To use the printer on a Novell NetWare network, you need to
configure the Ethernet card for NetWare.
With EPSON Net! for Windows, you can configure the
Ethernet card in one of two operating modes, Print Server or
Remote Printer. See the appropriate section below that fits your
needs.

Using the Ethernet card in Print Server mode

See the following sections to configure the Ethernet card in
Print Server or Auto Print Server/Remote Printer mode.
Logging in to file servers
To configure the Ethernet card in Print Server mode, you must
have supervisor privileges.
1. Open the EPSON Net! folder or program group and
double-click the EPSON Net! for Windows icon.
2. Click NetWare in the Summary dialog box.
3. Highlight the printer you want to configure from the list.
Note:
If you have connected more than one printer with the same type of
Ethernet card to the network, you can distinguish which card is
which using the card's unique serial numbers. Press the status
sheet button on the Ethernet card plate to print a status sheet for
each printer and check the serial numbers.
Using Windows
3-7