Palm™ Desktop Software; Hot Sync - ARTEX A3-06-2824-1 Operation Manual

Y1-03-0272-1 Rev. C
Palm™ Desktop Software
3.
To obtain the Palm™ Desktop Software, follow these instructions:
1. Open desktop browser and go to www.aceeca.com.
2. Select options in the following order:
3. Unzip file folder SFW_WINX32_PALM-DESKTOP_V4.1_20110322.ZIP.
• Support
• Downloads
• Desktop Software
• Palm/Garnet Desktop for Windows PC
• Download Now
4. Open file folder Palm Desktop Installation.
5. Double click setup.exe and follow prompts.
• Install Shield Wizard will open. Select Next.
•
Read the SOFTWARE LICENSE AGREEMENT.
• Select Existing User or Create New User.
• When asked about Connections, select USB.
•
Select Install, then Finish.
6. Open Palm Desktop.
NOTE: The Palm desktop software works most amiably if a single Meazura™ (Palm)
device is associated with a single computer. It is possible to use more than one
Meazura™ device with the same computer, but attention must be given to
selection of appropriate user names when transferring data to and from
different units.
The Palm™ software identifies the User Name when the Palm™ Desktop application is
installed on a PC. Only one User Name can be used with the Artex applications.
3.1

Hot Sync

Once installed and configured, the Palm™ Desktop software allows installation of
additional software applications, as well as performing the hot sync function to transfer
data to and from the Handheld Programmer (Meazura MEZ1500). ACR/ARTEX provides
a USB cable (452-0103) to connect to a PC.
The hot sync function is accessed by tapping the HotSync icon on the main Meazura
screen as shown in Figure 5. The hot sync operation is described in greater detail in the
Aceeca "HotSync Guide" available free for download at www.aceeca.com.
A3-06-2824-1 Handheld Programmer Operations Manual
Company Confidential Page 12