Mechanical Dimensions - National Instruments FieldPoint FP-DO-400 Operating Instructions Manual

Mechanical Dimensions

Figure 6 shows the mechanical dimensions of the FP-DO-400
installed on a terminal base. If you are using the cFP-DO-400,
refer to the Compact FieldPoint controller user manual for the
dimensions and cabling clearance requirements of the Compact
FieldPoint system.
107.19 mm
(4.22 in.)
109.5 mm
(4.31 in.)
91.44 mm
(3.60 in.)
Figure 6. FP-DO-400 Mechanical Dimensions
© National Instruments Corp. 13 FP-DO-400 and cFP-DO-400