Performance Check; Entering Patient Data; Resetting A Case/Discharging A Patient; About Continuing Monitoring - GE CARESCAPE ONE User Manual

CARESCAPE ONE User Manual DRAFT 26 October 2017

Performance check

After turning on the CARESCAPE ONE, and during operation, the monitor runs
automatic self-tests. If a malfunction is detected, the CARESCAPE ONE displays a
message or an alarm, depending on the severity of the malfunction.

Entering patient data

1. Select the patient information area on the screen, or select Pt. Data & Trends >
Admit/Discharge or Start / Reset Case.
2. Select the Patient tab.
3. Edit or enter patient data:
a. Select MRN: Second ID:, select the field to be edited, and enter the data.
Entering the Second ID: in addition to the Medical Record Number allows a
flexible use of local patient identification methods.
b. Select Name:, select the field to be edited, and enter the data.
c. Select Date of Birth: Age: to enter or edit the patient's date of birth or age.
If Day, Month, and Year are entered, Age is automatically calculated.
d. Select the Height: Weight: BSA: Gender: Ethnicity: field, then select values for
different types of data.
If height and weight are entered, the patient's BSA (body surface area) is
automatically calculated.

Resetting a case/discharging a patient

Resetting a case/discharging a patient deletes all patient information and returns
the monitor to the defined startup profile. This also happens when the CARESCAPE
ONE is in DEMO MODE.
All settings, including alarm limits, return to their default values. All patient data is
removed from the monitor.
The CARESCAPE ONE may be configured in care unit settings with an automatic
case reset/patient discharge timer. Care unit settings are password protected. If
an automatic case reset/patient discharge is configured and there are no active
parameters and no use of the touchscreen, monitoring will end automatically after
the configured time has elapsed.
1. Disconnect patient cables.
2. Select the patient information area on the screen or select Pt. Data & Trends >
Admit/Discharge or Start / Reset Case.
3. Select the Discharge / Reset Case tab > Confirm.

About continuing monitoring

The Continue menu opens when a decision must be made about continuing a patient
case. The menu may open after a warm start (monitor shut down for 2 hours or less)
or after standby. The message Patient in the monitor appears in the menu, along
2094480-001 CARESCAPE ONE
Starting and ending monitoring
69