Advertisement
Quick Links
Z-Wave DIN Rail 2x1.5kW Switch module
(Insert Fibaro FGS-222)
Ventilated DIN enclosure
•
16A rated PCB power tracks and terminals
•
Fibaro FGS-222 ON/OFF 2 relays included
•
Power Source 110V ... 230V, 50 / 60Hz
•
Max. AC output: 16A/ 230V (single output 8A)
•
Max. DC output: 16A / 30V (single output 8A)
•
Max. Power load 2x1.5kW resistive load
•
Conforms to EU regulations: EN55022 EN61000-6
•
Surge protection: 2.5A
•
Overheating protection: safety off at 105°C
•
To be mounted on standard DIN Rail
•
Radio protocol: Z-Wave, 868MHz
•
Antenna range: up to 50m outdoor / 30m indoor
•
Advertisement
Related Manuals for FIBARO FGS-222
Summary of Contents for FIBARO FGS-222
- Page 1 (Insert Fibaro FGS-222) Ventilated DIN enclosure • 16A rated PCB power tracks and terminals • Fibaro FGS-222 ON/OFF 2 relays included • Power Source 110V … 230V, 50 / 60Hz • Max. AC output: 16A/ 230V (single output 8A) •...
- Page 2 (apartment walls, furniture, etc.) and in extreme cases it fails to transfer DOUBLE RELAY SWITCH required data. The advantage of FIBARO system is that its devices apart from being transmitters and receivers of signals, they are also FGS-222-EN-A-v1.01 a signal "duplicators".
- Page 3 255 - ALL ON active, ALL OFF active. 0 - ALL ON is not active ALL OFF is not active Fibaro Switch responds to commands ALL ON / ALL OFF that may 1 - ALL ON is not active ALL OFF active NOTE be sent by the controller.
- Page 4 • damages resulting from: surges in the power and/or telecommuni- VIII Procedures for malfunctions 0 - Fibaro Switch does not save the state after a power failure, it cation network, improper connection to the grid in a manner returns to "off" position inconsistent with the operating manual, or from connecting other devices not recommended by the Manufacturer.
Need help?
Do you have a question about the FGS-222 and is the answer not in the manual?
Questions and answers