Canon CanoScan 9000F Mark II Quick Start Manual page 4

Scan film with the Canon CanoScan 9000F Mark II
Select ScanGear from the menu on the left side of the Settings menu then select Add from the
Save in drop-down menu. Navigate to your preferred save location. Click OK to save the setting
then re-open the ScanGear panel to continue scanning. You should find that any settings you
previously entered have been retained.
9
When you are satisfied with all your settings, including the save location, you can click the Scan
button.
Scanning progress bar
Scanning may take several minutes, depending on the customised settings you have entered. The
higher the image dimension and resolution settings, the longer it will take. If you set the image
dimensions of the scanned image as larger than the original film or slide size, then you can lower
the dpi (dots per inch) setting to create a smaller file.
10
When scanning is complete, a panel opens (above right) offering the option to edit (retouch)
and save the images you have just scanned or to carry on scanning.
If you select Retouch and save the image, ScanGear will close and the folder location of the
scanned images will open. You can then open and edit the images in Photohop if you wish.
If you close Scangear and then decide you need to scan more film items, your settings will have
been retained when you relaunch ScanGear from the Canon Scan Utilities panel.
See "Troubleshoot scanning" on page 5 for further support.
August 2018
Settings panel showing ScanGear options
4
Options after scanning is completed
www.ed.ac.uk/is/ucreate
IS.Helpline@ed.ac.uk