General Information - Siemens SIMEAS P 7KG7550 Operating Instructions Manual

1.2

General Information

These operating instructions include the information
required for proper use of the corresponding products.
These operating instructions are intended for technically
qualified personnel with sufficient competence and
knowledge in the areas of instrumentation and control
engineering, which will be referred to as automation
engineering throughout the rest of these operating
instructions.
In order to ensure safe installation and commissioning, as
well as safe operation and maintenance, all personnel
should fully understand and comply with all safety
information and warnings contained in this document in a
technically correct manner. Only personnel who meet the
requirements outlined in Chapter 1.3 for qualified personnel
possess the expertise and knowledge required to apply the
general safety information and warnings of this document
correctly for each specific and individual scenario.
While these operating instructions are included with the
product, it is important to note that not every aspect of the
product, nor every possible installation, operation and
maintenance scenario, can be thoroughly discussed.
If more information is required, or if specific problems arise
which are not discussed in this document, additional
information can be requested from your local Siemens
subsidiary or from the address given on the back cover of
this document.
3