Spark Plug - HERO DESTINI 125 Series Manual

Hide thumbs Also See for DESTINI 125 Series:
Table of Contents

Advertisement

SPARK PLUG

Refer to the safety precautions (page 48).
Recommended spark plug.
Champion-RG8YC (Federal Mogul)
Remove the center cover (page 35).
Disconnect the noise suppressor cap (1)
from the spark plug.
Clean any dirt around the spark plug base.
1
(1) Noise suppressor cap
Remove the spark plug using the
wrench plug provided in the tool kit.
Inspect the electrodes and center
porcelain for deposits, erosion or carbon
fouling. If the erosion or deposit is heavy,
replace the plug. Clean carbon or wet fouled
plug with a plug cleaner.
Check the spark plug gap using a wire-type
feeler gauge. If adjustment is necessary,
bend the side electrode (2) carefully.
2
(2) Side electrode
With the plug washer attached, thread the
spark plug in by hand to prevent cross
threading.
Tighten a new spark plug 1/2 turn with a
wrench plug to compress the washer. If you
are reusing a plug, it should only take 1/8-
1/4 turn after the plug seats.
Reinstall the noise suppressor cap.
!
!
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
The spark plug must be securely tightened.
An improperly tightened plug can become
very hot and possibly damage the engine.
64
0.8-0.9 mm
WARNING

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESTINI 125 Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Destini 125 lxDestini 125 vx

Table of Contents

Save PDF