Getinge Lancer Ultima Series User Manual
  1. Manuals
  2. Brands
  3. Getinge Manuals
  4. Washer
  5. Lancer Ultima Series
  6. User manual

Getinge Lancer Ultima Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

ULTIMA series
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lancer Ultima Series and is the answer not in the manual?

Questions and answers

Ila Bjornson-root
January 23, 2025

I keep getting alarm 19 and this is not listed in the manual.

0

Related Manuals for Getinge Lancer Ultima Series

Summary of Contents for Getinge Lancer Ultima Series

  • Page 1 ULTIMA series USER MANUAL...
  • Page 2 In order to ensure that our products are continually improved, GETINGE LANCER reserves the right to make any changes to their features relating to technical developments Drawings and photos are non-contractual ORIGINAL INSTRUCTIONS...

  • Page 3: Table Of Contents

    ULTIMA series SUMMARY CHAPTER 1 PRESENTATION OF THE ULTIMA SERIES ......5   CHAPTER 2 GENERAL INFORMATION ..........7     GENERAL CONSIDERATIONS       COPYRIGHT – LIABILITY     DECLARATION OF CONFORMITY     MANUFACTURER   SAFETY WARNINGS  ...
  • Page 4 ULTIMA series BUILT-IN PRINTER (OPTION)         CHECKING THE PRINTER     CHOICE OF THE SUITABLE PAPER ROLLS     REMOVING PAPER AND CLEARING PAPER JAMS     LOADING PAPER     OPERATING MODES     PRINTER MAINTENANCE EXTERNAL PRINTER (OPTION)  ...
  • Page 5 ULTIMA series     REPRINTING TICKETS USER SETUP       EDIT PROGRAMS   CHAPTER 6 TRACEABILITY ............... 45   MACHINE TRACEABILITY DOCUMENT     PRINTER (OPTION)       THE PRO KIT (OPTION) (OPTION ONLY FOR 810-815-820-910-1300-1400 LX MODELS)  ...
  • Page 6 ULTIMA series     RECOMMENDED SPARE PARTS 1300 LX     RECOMMENDED SPARE PARTS 1400 LX / 1400 LXP     RECOMMENDED SPARE PARTS 1600 LXP     RECOMMENDED SPARE PARTS 1800 LXA DISPOSAL OF WASHER     CHAPTER 9 WASHING PROGRAMS ..........67  ...

  • Page 7: Chapter 1 Presentation Of The Ultima Series

    CHAPTER 1 PRESENTATION OF THE ULTIMA series You have in your possession a GETINGE LANCER ULTIMA series washer. The ULTIMA series washer and ULTIMA series washer/dryer has been designed to meet and exceed the growing requirements of the Laboratory industry for cleaning of glassware in the chemistry, microbiology, quality control and...

  • Page 9: Chapter 2 General Information

    GETINGE LANCER pays close attention to all technical developments and continuously seeks to improve its products and services in order to provide an adequate response to the needs of its clients. GETINGE LANCER therefore reserves the right to modify the related documentation without prior notice.

  • Page 10: Operator Training

    Installation and maintenance must be carried out by staffs who have received training for this equipment. 3. PRODUCT & ADDITIVE LIABILITY ULTIMA series washers must be used under normal operating conditions as indicated in this GETINGE LANCER user manual. Failure to follow these recommendations including training could result in material damage or personal injury and will render null and void any warranty or liability on GETINGE LANCER part.

  • Page 11: Chapter 3 Ultima Series Washers

    ULTIMA series ULTIMA series WASHERS CHAPTER 3 ULTIMA series WASHERS 1. OPERATOR INTERFACES 1.1 TOUCH SCREEN (example of the main screen) 1.2 ICON LIST Login Logout Page Up Page Down Information System Door Open Door Close Light Back Confirm Close Documentation Edit Program Sampling...

  • Page 12: Alphanumeric Keypad

    ULTIMA series ULTIMA series WASHERS Edit Users Counters Rename Temperature Security Alarm Timers Settings Settings Pressure Flow Meters Conductivity Transmitters Edit System File Management System Reset Chemical Equipment ID Water Supplies Supplies Door Drying Sequence Names Management Regulation Download File Upload File Reboot System 1.3 ALPHANUMERIC KEYPAD...

  • Page 13: Emergency Stop Button

    ULTIMA series ULTIMA series WASHERS 2. EMERGENCY STOP BUTTON AN OPTION FROM THE 1300 LX / LXP / STANDARD ON 1800 LXA The button should be used in case of an emergency, press the emergency stop button to immediately stop the operation of the washer.

  • Page 14: Safety Advices

    In the same way, it is strongly recommended not to use solvents or aerosols near the apparatus.  If incidents occur and you cannot solve those using solutions that we recommend you, do not hesitate to contact GETINGE LANCER technical assistance service. 4.1 PRECAUTIONS FOR USE BURN RISK IF THE DOOR IS OPENED OVER 60°C.

  • Page 15: Safety Labells

    ULTIMA series ULTIMA series WASHERS 4.2 SAFETY LABELLS SAFETY GLASSES MANDATORY SAFETY GLOVES MANDATORY RISK FOR OPERATOR DEPENDS ON THE PRODUCTS (DETERGENTS AND ACIDS) USED INSIDE THE MACHINE AND ON THE NATURE OF DEPOSITS ON THE ITEMS TO BE CLEANED. WEARING SAFETY GLASSES AND GLOVES May NOT BE SUFFICIENT IN SOME CASES.

  • Page 16: Maximum Charge

    It is possible to strengthen the baskets to your request, please feel free to contact GETINGE LANCER for advice or assistance.
  • Page 17 ULTIMA series ULTIMA series WASHERS 1800 LXA MODELS The washer is equipped with a door locking device which prevents its opening during the washing cycle. At switching ON, door is automatically opened. When washer is loaded, washing cycle can begin. Select the cycle and press the icon to start the program, the door closes automatically.

  • Page 18: Washing Products

    6. WASHING PRODUCTS PROGRAMS PREESTABLISHED WITH THIS WASHER HAVE BEEN VALIDATED WITH THE GETINGE LANCER BRAND WASHING PRODUCTS. THE INFORMATION CONCERNING THE SAFETY DATA OF THE GETINGE LANCER WASHING PRODUCTS HAS BEEN DELIVERED WITH THE MACHINE. 6.1 PRODUCT TANK AREA...

  • Page 19: Washing Products Categories

    INFORMATION REGARDING THE DETERGENT USED IN THIS EQUIPMENT. INCOMPATIBLE CHEMICAL LIQUIDS CAN HARM THE EQUIPMENT. THE PROGRAMMED CYCLES ON THIS WASHER HAVE BEEN VALIDATED WITH GETINGE LANCER CHEMICALS. NEUTRALIZING ACID Using the correct non-foaming neutralizing acid is required for proper cleaning in this machine. The non-foaming neutralizing acid must be matched to remove the detergent source in order to ensure satisfactory washing.

  • Page 20: Change Of The Tanks

    ULTIMA series ULTIMA series WASHERS 6.4 CHANGE OF THE TANKS Before launching the cycle, check product tank levels and change those with low levels so as to avoid bad washing because of a lack of additive. 6.5 HOW TO CHANGE CHEMICAL CONTAINER Switch the washer OFF.

  • Page 21: Built-In Printer (Option)

    This can affect the warranty. The paper roll is delivered separately in order to prevent it from unrolling or becoming damaged during transport. Consult your GETINGE LANCER representative about suitable paper rolls.

  • Page 22: External Printer (Option)

    Please use quality paper. The use of non-approved products can cause dust and increased wear. This can affect the guarantee. The paper roll is normally delivered separately in order to prevent it from unrolling or becoming damaged during transport. Consult GETINGE LANCER about suitable paper rolls. 8.3 REMOVING PAPER AND CLEARING PAPER JAMS If there is some paper in the printer when a new roll is necessary or a paper jam has occurred, simply open the cover and press the paper advance button.

  • Page 23: Note Printing

    ULTIMA series ULTIMA series WASHERS 8.7 NOTE PRINTING If the printer is connected to a battery pack and not an AC battery charger, it is imperative to control the operating mode (sleep mode / idle mode) of your printer prior to launch the printing. In the user menu, you can access to the reprinting cycles tickets and in the supervisor menu for printing: ...

  • Page 24: Using Of The Accessories

    ULTIMA series ULTIMA series WASHERS 9. USING OF THE ACCESSORIES 9.1 SOME EXAMPLES In order to wash items in "LTC" or "STC" type baskets, place the baskets on the "PS" (basic rack) or "PSBT" (basic rack with spray arm) after removing one or more "GS"...
  • Page 25 Please feel free to contact GETINGE LANCER for advice or assistance. When several racks are used simultaneously on the different levels, only one rack should be pulled out of chamber on the door and the runners at a time.

  • Page 26: Fitting The Baskets

    Push basket and rail slides all the way into the chamber. THE CHOICE OF THE BASKETS AND RACKS IS VERY IMPORTANT TO EFFICIENT CLEANING. PLEASE FEEL FREE TO CONTACT GETINGE LANCER FOR ADVICE OR ASSISTANCE. NU_ULTIMA_02_EN_1612...
  • Page 27 ULTIMA series ULTIMA series WASHERS 1800 LXA MODELS The rails, not positioned in the central rack, are locked inside the chamber using a spring lock. Before fitting basket you must :  Press the spring to release the rail.  Relax the pressure once the rail is completely clear. RISK OF FINGER PINCH.

  • Page 28: Loading Glassware

    9.1 LOADING GLASSWARE A MINIMUM CLEARANCE OF 25 MM (1 IN) IS REQUIRED BETWEEN THE END OF THE INJECTOR AND THE BASE OF THE GLASSWARE. PLEASE FEEL FREE TO CONTACT GETINGE LANCER FOR ADVICE OR ASSISTANCE. Some examples of loading glassware:...

  • Page 29: Chapter 4 Launching A Cycle

    ULTIMA series LAUNCHING A CYCLE CHAPTER 4 LAUNCHING A CYCLE 1. CYCLES PRESENTATION PROGRAMME 01: VOLUMETRIC FLASKS  Prewash with the detergent  Wash with the detergent.  Acid rinse with the neutralizant acid  Rinse with purified water  Final rinse at 50°...

  • Page 30: Connecting To The Mains

    ULTIMA series LAUNCHING A CYCLE 2. CONNECTING TO THE MAINS Press the ON button. After a few seconds, the Initialization screen is displayed. After the software is loaded, the main screen is shown. 3. SECURITY LEVEL Depending upon the configured security level, you may be prompted to login for access to certain menus and to launch a cycle.

  • Page 31: High Security (Level 2)

    ULTIMA series LAUNCHING A CYCLE 3.2 HIGH SECURITY (LEVEL 2) Press icon to login to system. The login menu is shown. Pressing on the user name field will allow the alphanumeric keypad to open. The user name is entered and the icon is pressed to accept the entry and return to the login menu.

  • Page 32: Informations During The Cycle

    ULTIMA series LAUNCHING A CYCLE 5. INFORMATIONS DURING THE CYCLE During normal wash cycle operation, the Circle graph is shown. Additional information (Program #, Sequence, Phase, Total Cycle Time, and Phase Time) is shown in the display header. The wash cycle can be stopped / aborted by pressing the icon.

  • Page 33: End Of Cycle

    ULTIMA series LAUNCHING A CYCLE 6. END OF CYCLE If the wash cycle is completed without incident, the cycle complete display is shown. Press the icon to acknowledge the cycle. If washer is fitted with a door locking device, the door can be unlocked by pressing on the icon.

  • Page 35: Chapter 5 Access To The User's Menu

    ULTIMA series ACCESS TO THE USER’S MENU CHAPTER 5 ACCESS TO THE USER’S MENU 1. SAMPLING A sampling valve can be fitted on the sump of the washer to perform sampling of the washer water. A sampling selection in the program stops the washer.

  • Page 36: Washer Documentation

    ULTIMA series ACCESS TO THE USER’S MENU 2. WASHER DOCUMENTATION Selecting a program from main menu (P01 in this example) will open a menu in which you can perform different functions related to program cycles. Pressing the icon will allow you to view the program setup for the current cycle.
  • Page 37 ULTIMA series ACCESS TO THE USER’S MENU NU_ULTIMA_02_EN_1612...
  • Page 38 ULTIMA series ACCESS TO THE USER’S MENU At any point you can press icon to send the program cycle data to USB or printer (If the printer option is not fitted on washer, the printer icon will be shown in grey to indicate that it is not active.) NU_ULTIMA_02_EN_1612...

  • Page 39: Pump Priming

    ULTIMA series ACCESS TO THE USER’S MENU 3. PUMP PRIMING Selecting a program from main menu will open a menu in which you can perform different functions related to program cycles. Pressing the icon will allow you to select and then prime a chemical pump.

  • Page 40: Ticket Parameters (Only For Washer With Printer Option)

    ULTIMA series ACCESS TO THE USER’S MENU 4. TICKET PARAMETERS (only for washer with printer option) Selecting a program from main menu will open a menu in which you can perform different functions related to program cycles. Pressing the icon will open a menu in which you can to select and edit ticket header and footer information and also reprint previous cycle tickets.

  • Page 41: Ticket Footer

    ULTIMA series ACCESS TO THE USER’S MENU 4.2 TICKET FOOTER Press the icon to display the footer menu. Press the applicable Footer 1, 2, or 3 icon to open the alphanumeric keypad. Press icon to confirm text entry and to close the alphanumeric keypad.

  • Page 42: User Setup

    ULTIMA series ACCESS TO THE USER’S MENU 5. USER SETUP Pressing the icon will open the system menu and allow you to edit system functions. (Note, this is a restricted menu and if the operator is not already logged in they will be required to enter an access code or user name/password depending upon the defined security level.) Pressing on the icon will allow an operator to change...

  • Page 43: Edit Programs

    ULTIMA series ACCESS TO THE USER’S MENU 6. EDIT PROGRAMS Selecting a program from main menu (P5 in this example) will open a menu in which you can perform different functions related to program cycles. Pressing the icon will allow you to edit the program parameters.
  • Page 44 If you wish to create a custom wash program, please refer to the factory default programs for examples of typical times and temperatures. You may also contact your GETINGE LANCER representative for advice on creating wash programs. It is not recommended to install the machine in a place exceeding 30°C. It will help to increase during the cycle the temperature inside the machine.
  • Page 45 ULTIMA series ACCESS TO THE USER’S MENU On each page you must press icon to save modification. Follow this same process for other sequences you desire to setup. (Example screens of the different sequences are shown below.) If you do not wish to save the changes, press on the icon NU_ULTIMA_02_EN_1612...
  • Page 46 ULTIMA series ACCESS TO THE USER’S MENU NU_ULTIMA_02_EN_1612...

  • Page 47: Chapter 6 Traceability

    (corrective and preventive). REGARDLESS OF THE RESULTS OF THE PROCESSED CYCLE,, YOU MUST REVIEW THE WASHER PRINTOUTS BEFORE ARCHIVING THEM GETINGE LANCER recommends to photocopy or scan the processing cycle printouts. 2. PRINTER (OPTION) To ensure cycle documentation, information can be printed on a printer.

  • Page 48: Models)

    ULTIMA series TRACEABILITY 3. THE PRO KIT (OPTION) (OPTION ONLY FOR 810-815-820-910-1300-1400 LX MODELS) The PRO KIT tracks a number of parameters and prints out their status OK/NOK or values at the end of the cycle for the customer’s records and attention. It is an easy and efficient method of quick analysis of the report.

  • Page 49: Validation Monitor, Printer (Option)

    ULTIMA series TRACEABILITY 4. VALIDATION MONITOR, PRINTER (OPTION) (OPTION ONLY FOR 1400-1600LXP/1800LXA MODELS) The validation monitor has its own probes to check and validate every parameter of the cycle of the washing cycle. The validation monitor option includes:  One built-in panel printer ...

  • Page 51: Chapter 7 Alarms

    ULTIMA series ALARMS CHAPTER 7 ALARMS 1. INCIDENTS INCIDENTS SOLUTION / VERIFICATION The tube is blocked. The detergent or neutralizing agent does not enter The tank is empty. in the washer The pump hose is pinched. It is not connected to the power supply. There is mains power.
  • Page 52 ULTIMA series ALARMS icon is only active in Standby mode. Pressing the icon will allow you to export the alarm history data to USB or the printer by pressing on the appropriate icon. (If the printer option is not fitted on washer, the printer icon will be shown in grey to indicate that it is not active.) NU_ULTIMA_02_EN_1612...

  • Page 53: Warnings

    ULTIMA series ALARMS 3. WARNINGS After the Start icon is pressed, the system checks for any problems and will notify the operator via warning messages. Pressing the icon will clear the warning. The following message is displayed if the temperature inside the washing chamber is above the safety temperature set point for door opening.
  • Page 54 ULTIMA series ALARMS After turning on the machine, the reminder of the upcoming preventative maintenance is shown on the display. SERVICE TIME Acknowledge the reminder. Schedule a preventative maintenance service call. The following message is displayed at the start of the cycle. REGENERATION RENEWAL * only for washers with regeneration Fill the salt pot located inside the washer.

  • Page 55: Alarms Table

    ULTIMA series ALARMS 4. ALARMS TABLE If an alarm occurs, the wash cycle is aborted and the appropriate alarm message is shown in red. Pressing the icon will clear the alarm. 4.1 WASHER ALARMS LIST - Check that drain pipe or drain During the draining phase, the washer as not valve/pump is not obstructed.
  • Page 56 ULTIMA series ALARMS ADDITIVE 1 INTAKE: UNEXPECTED * optional ProKIT or validation monitor ADDITIVE 2 INTAKE: UNEXPECTED * optional ProKIT or validation monitor ADDITIVE 3 INTAKE: UNEXPECTED A flow of product is detected outside a - Check the flowmeter. * optional ProKIT or validation monitor product intake phase.

  • Page 57: Validation Monitor /Pro Kit Alarms (Option)

    ULTIMA series ALARMS 4.2 VALIDATION MONITOR /PRO KIT ALARMS (OPTION) - Check that the baskets are in the machine or that the rack ports are capped accordingly. COLUMN PRESSURE : OUT OF Pressure is lower than the minimum set point - Check that the pump operates RANGE –...

  • Page 59: Chapter 8 Maintenance Of The Washer

    ULTIMA series MAINTENANCE OF THE WASHER CHAPTER 8 MAINTENANCE OF THE WASHER NEVER USE OR PLACE IN THE WASHER REMMANTS OF PRODUCTS SUCHS AS ACETONE, SOLVANTS, OIL, SULFO-CROMIC, PETROL DERIVATIVES, ACIDS (SULFURIC, NITRIC, CLORHIDRIC, EVEN AT LOW CONCENTRATIONS), ETC. DURING THE CLEANING OPERATIONS INSIDE THE CHAMBER, IT IS CONVENIENT TO WEAR SAFETY GLOVES WITH GLOVES AND TO PAY ATTENTION TO THE EVENTUAL EDGE TOOLS (NEEDLES, INSTRUMENTS…) WHICH COULD BE PLACED INSIDE THE FILTERS OF THE BOTTOM OF THE...

  • Page 60: Regenerating Of Softener (Option)

    ULTIMA series MAINTENANCE OF THE WASHER 2. REGENERATING OF SOFTENER (OPTION) Only for washers with regeneration (option). This function is automatic (masked time). When the display unit indicates " ", it is essential to fill SALT RECHARGE the salt pot located at the bottom of the chamber, inside the washer.

  • Page 61: External Maintenance Of The Washer

    ULTIMA series MAINTENANCE OF THE WASHER 5. EXTERNAL MAINTENANCE OF THE WASHER GETINGE LANCER washers are entirely covered with panels (bodywork) in stainless steel AISI 304L. 5.1 CLEANING METHOD Regular maintenance cleaning is done using a soft cleaning product. In the event that regular cleaning tasks have been neglected for too long, we recommend using a special cleaner.

  • Page 62: Shut Down At End Of Day

    SHUT DOWN THE APPLIANCE. 7. PREVENTIVE MAINTENANCE GETINGE LANCER’S TECHNICAL ASSISTANCE SERVICE recommends to carry out a preventive maintenance action every year in order to guarantee the validity of the washing cycles and to ensure the operation of the washer.

  • Page 63: Preventative Maintenance Schedule

    Verify the correct operation of the non-return valve of the drying network (if applicable) (1) Daily maintenance must be handled by users staff. (2) Others maintenances (bi-annual, 1 year, 2 years & 5 years) must be carry out by the GETINGE LANCER’s technical assistance service. NU_ULTIMA_02_EN_1612...

  • Page 64: Recommended Spare Parts

    ULTIMA series MAINTENANCE OF THE WASHER 9. RECOMMENDED SPARE PARTS 9.1 RECOMMENDED SPARE PARTS 810 LX – 815 LX Description Part # Quantity/ Machine Door Spring 12010003 Door wheels 46020064 Door cable 46040004 Emptying Pump 50/60 hz 23010150 Pressurestat 28020066 Autoclude...

  • Page 65: Recommended Spare Parts 910 Lx

    ULTIMA series MAINTENANCE OF THE WASHER 9.3 RECOMMENDED SPARE PARTS 910 LX Description Part # Quantity / Machine Door Spring 12010003 Door wheel 46020064 Door cable 46040004 Emptying Pump 50/60hz 23010150 Pressurestat 28020066 Autoclude Internal tubing 23080014 Main Pump 50/60hz 23010149 Capacitor 26010023...

  • Page 66: Recommended Spare Parts 1400 Lx / 1400 Lxp

    ULTIMA series MAINTENANCE OF THE WASHER 9.5 RECOMMENDED SPARE PARTS 1400 LX / 1400 LXP Description Part # Quantity / Machine Emptying Pump 50hz 23010150 Emptying Pump 60hz 23010060 Pressurestat 28020066 Autoclude Internal tubing 23080014 Main Pump 50hz  400v tri/50hz 23010052 ...

  • Page 67: Recommended Spare Parts 1800 Lxa

    ULTIMA series MAINTENANCE OF THE WASHER Threaded Connection 33080026 Water Inlet Filter/Seal 17010025 Heating Relay 20030007 filter of the dryer 17020033 Fan of the dryer 23080170 9.7 RECOMMENDED SPARE PARTS 1800 LXA Description Part # Quantity / Machine Emptying Pump 50hz 23010150 Emptying Pump 60hz 23010060...

  • Page 69: Chapter 9 Washing Programs

    1. FACTORY PROGRAMMED CYCLE PROGRAMS PREESTABLISHED WITH THIS WASHER HAVE BEEN VALIDATED WITH THE GETINGE LANCER BRAND WASHING PRODUCTS. 1.1 FLOW-RATE OF ACID AND DETERGENT PUMPS The flow-rate of the acid and detergent pumps (depending on the used products) :...

  • Page 70: Waters Used On Factory Programmed Cycles According To Standard And Softener Option

    ULTIMA series WASHING PROGRAMS 1.4 WATERS USED ON FACTORY PROGRAMMED CYCLES ACCORDING TO STANDARD AND SOFTENER OPTION Information below, corresponding to water used following different programmed phases and washer option, must be used on grey part on factory programmed cycle. Functions Possibility STANDARD configuration (no softener)

  • Page 71: 810 Lx / 815 Lx - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.5 810 LX / 815 LX - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 72: 820Lx - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.6 820LX - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 73: 910 Lx - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.7 910 LX - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 74: 1300 Lx - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.8 1300 LX - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 75: 1400 Lx - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.9 1400 LX - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 76: 1400 Lxp - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.10 1400 LXP - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 77: 1600 Lxp - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.11 1600 LXP - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 78: 1800 Lxa - Factory Programmed Cycle

    ULTIMA series WASHING PROGRAMS 1.12 1800 LXA - FACTORY PROGRAMMED CYCLE Volumetric Bacterio. Chemistry Agarose Gel Flasks Virology Biology SEQUENCES POSSIBILITIES PROG. 01 PROG. PROG. 03 PROG. 04 PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT...

  • Page 79: User Cycle Programming Table

    IF YOU WISH TO CREATE A CUSTOM WASH PROGRAM, PLEASE REFER TO THE FACTORY DEFAULT PROGRAMS FOR EXAMPLES OF TYPICAL TIMES AND TEMPERATURES. YOU MAY ALSO CONTACT YOUR GETINGE LANCER REPRESENTATIVE FOR ADVICE ON CREATING WASH PROGRAMS. IT IS NOT RECOMMENDED TO INSTALL THE MACHINE IN A PLACE EXCEEDING 30°C.
  • Page 80 ULTIMA series WASHING PROGRAMS SEQUENCES POSSIBILITIES PROG. PROG. PROG. PROG. PREWASH TIME 1 0 TO 30 MN FILLING 1 / 2 / 3 / 4 / 5 PREWASH 1 TEMPERATURE 0 TO 95 °C PREWASH 1 DETERGENT 0 TO 9999 ml OPTION : PREWASH 1 DETERGENT 2 0 TO 9999 ml OPTION : PREWASH 1 NEUTRALIZATION...

This manual is also suitable for:

810lx815 lx820 lx910 lx1300 lx1400 lx ... Show all

Table of Contents

Save PDF