Summary of Contents for ABI Attachments Infield Rascal Pro
Page 1
Infield Pro Setup Guide Model shown may have additional options Version 1.0.8 Please read fully before removing the Pro from the Pallet! ABI( ) - 1320 Third Street, Osceola IN 46561 - 855-211-0598 Absolute Innovations, Inc. www.abiattachments.com...
Page 2
Please read fully and understand before operating the Infield PRO Thank You, On behalf of the ABI family we would like to thank you for your recent purchase of your ABI Infield PRO. Our Company’s goal is to provide our customers with innovative, quality tools as well as first rate customer service.
Page 3
Please read fully and understand before operating the Infield PRO Operational Safety Rules- Please exercise caution at all times when setting up, operating, or performing maintenance on the PRO. Remember, any piece of equipment like the PRO can cause injury/damage if operated improperly or if the user does not understand how to operate the equipment.
Page 4
Please read fully and understand before operating the Infield PRO Tools needed for assembly: ¾” Combination Wrench ¾” Socket with Wrench Metal Snips Removing the Infield PRO from the Pallet- 1) Remove all boxes containing additional parts from the shipping pallet and place them off to the side.
Page 5
Please read fully and understand before operating the Infield PRO 8) Once the PRO is attached to a tow vehicle, lower the wheels on the PRO using the square hand jack, until all attachments raise fully clear of the shipping pallet. 9) When all the attachments on the PRO have properly cleared the shipping pallet the PRO can be removed from the shipping pallet.
Page 6
Please read fully and understand before operating the Infield PRO 5) NOTE: For Infields that are compacted, or have not been maintained; adjust the Vibraflex so the very front pins are slightly higher than the back, about 1/8”; to help prevent chatter during the initial setup and use.
Page 7
Please read fully and understand before operating the Infield PRO Maintenance: Wheels and Hubs - Make sure to check the pressure in the tires to ensure they are properly inflated. If the wheels look to be low on air, fill them until they reach the Manufacturer’s suggested P.S.I. The proper P.S.I for the wheel can be located on the side wall of the tire.
Page 8
Please read fully and understand before operating the Infield PRO For additional setup or usage questions feel free to contact ABI’s Customer Service Department at 855-211-0598 M-Th 8am-8pm EST - Friday 8am-5pm EST. Additional information on the PRO is available on the ABI support page at www.abisupport.com. For questions on purchasing parts for your PRO please contact the ABI Customer Service Department at: 877-788-7253 M-Th 8am-8pm EST - Friday 8am-5pm EST.
Need help?
Do you have a question about the Infield Rascal Pro and is the answer not in the manual?
Questions and answers