Dresser Andco Eagle Installation Manual

Andco Eagle Actuator
Installation Manual
NOTICE
The information contained in this manual is essential
to safe, successful, long term operation of your Andco
Eagle linear actuator. Read and follow the requirements
concerning storage, installation and adjustments. Failure
to do so could void the warranty covering your actuator.
AVIS
Les renseignements contenus dans ce manuel sont essentiels
au fonctionnement sûr, efficace, durable de votre actionneur
linéaire Andco Eagle. Lisez et respectez les exigences relatives au
stockage, à l'installation et aux réglages. Le non-respect de ces
exigences peut annuler la garantie couvrant votre actionneur.
This manual gives instructions for storing, installing, operating and
servicing the Model 3100 Eagle linear actuator.
WARNING
PPE
Approved Personnel Protective
Equipment for the site must
be worn.
AVERTISSEMENT
EPI
Il convient de porter un
équipement de protection
individuelle sur le site.
WARNING
GROUNDING LUG
Unit must be grounded with
minimum size 10 AWG wire.
AVERTISSEMENT
PATTE DE MISE À LA TERRE
L'unité doit être mise à la terre
avec un fil de calibre 10 au moins.
Andco Actuators
Refer all questions not covered in this manual to:
Industrial Products Group
Andco Actuators
16240 Port Northwest Drive
Houston, TX 77041
T: 832-590-2306
Toll Free: 1-800-945-9898
F: 713-849-2879
Be sure to include the model and serial number located on the
nameplate of your Eagle actuator in all communications and
parts orders. The nameplate is located on the gear housing cover.
Numbers in brackets refer to item number in figure 2 on page 8.
Intent of Usage/Application
Dresser Natural Gas Solutions (NGS) Andco electric linear
actuators offer a superior choice when reliable, precise, controlled
motion is required. Whether moving industrial doors, providing
accurate positioning feedback for antennas, or modulating
and controlling louver dampers, customers can rely on Andco
actuator solutions.
The Andco Eagle actuators include weatherproof and dustproof
units, offering customers durability and performance in severe
industrial environments, including hot and cold temperature
extremes. Andco Actuators are a superior solution for a range of
functions including positioning, lifting/lowering, pushing/pulling,
and opening/closing.
Andco actuator technology offers low maintenance packages
with internal adjustable limit switches for on/off controls and
light indication, optional internal position/process controls for
positioning, and motor control. Our actuator solutions deliver
ease of installation, maintain constant output force and velocity,
and consume power only during movement.
These actuators feature:
• High-starting torque motor with thermal overload protection
• Non-rotating extension rod
• Non-back driving acme screw
• All metal gearing