Software Version 2.55 Or Lower - Aerotech MPG Hardware Manual

MPG Hardware Manual

2.2.2. Software Version 2.55 or Lower

IMPORTANT: This configuration is applicable for customers that have installed software
version 2.55 or lower. Refer to
higher.
The MPG requires a CNC G-Code program running on a secondary task to monitor the MPG switches
and command the axes to move when the user rotates the manual pulse generator (MPG or
handwheel). This program and other required files are distributed with the A3200 software. They can be
found in the \A3200\Samples\Gcode\MPG folder.
www.aerotech.com
Section 2.2.1.
Figure 2-28: Opening the MPG Folder
2.2.2. Software Version 2.55 or Lower
if you have a software version 3.00.000 or
51