Advertisement
Quick Links
Advertisement
Summary of Contents for LinTronic BT-RS232
- Page 1 LinTronic BlueTooth receiver BT-RS232 for BeoRemote One Updated: 200803...
- Page 2 DISCLAIMER The functionality of the BT-RS232 is based on the bluetooth commands transmitted by the “BeoRemote One Bluetooth” remote control produced by Bang&Olufsen, Denmark: https://www.bang-olufsen.com The BT-RS232 is developed in March 2020 without any assistance from Bang&Olufsen. Bang&Olufsen is not responsable for the functionality/software of the BT-RS232.
- Page 3 Our TT455-RT-238 will receive the IR signals and control your non-B&O audio/video products, relays, etc. See http://lintronic.dk/hw6.pdf Our BT-RS232 wil receive the BT signals and convert them into RS232. The BT-RS232 can be connected to your homeautomation system, controller (AMX, Crestron, Control4, etc.). Also the BT-RS232 can send the BT signals (shaped as RS232 commands) to the TT455-RT-238 and this way control your existing audio/video products by BT converted into IR.
- Page 4 Example: TV mode on the IR remote and TV mode on the BT remote, are two different modes. This allows you to control the same TV with the two remotes or two different TV’s (or other products). Beoremote One Infrared IR RECEIVER or Beo4 TT455-RT-238 (infrared) BT-RS232 (bluetooth) Beoremote One Bluetooth...
- Page 5 5 volt power supply and cable not included RS232 - standard SUBD9 female Pin 2 Tx data Pin 3 RX data 56 mm Pin 5 Ground Dimensions 1:1 Bluetooth logo is not printed on cabinet. Pairing button LED, indicates status of BT-RS232...
- Page 6 BT-RS232 POWER SUPPLY BT-RS232 is powered by a standard 5 Volt USB charger. We are not able to be price competitive on chargers. Be advised that IKEA offer a charger at only 5 Euro’s and a USB Micro cable at only 2 euro’s.
- Page 7 Blinking Red, 5 times pr. second How to pair the BT-RS232 and the Beo Remote One Bluetooh Activate the pairing button of the BT-RS232 - the LED starts flashing fast. Activate the LIST button of the BeoRemote One Bluetooth. The remote controls display will show “Settings”.
- Page 8 BeoRemote One Bluetooth This page shows how we support the BeoRemote One Bluetooth. The upper 6 buttons are considered modes and BANG&OLUFSEN all other buttons are considered triggers. USER 1 USER 2 MODES USER 3 USER 4 MUSIC LIST GUIDE INFO TRIGGERS >...
- Page 9 Configurators Memory Map / Settings. Please be advised that the trigger-numbers for the X-long commands are determined by LinTronic. If we later find thatthe BR1BT use these numbers for original B&O commands, then we either have to change them og skip this function.
- Page 10 BT-RS232 modules, making it easy to swap between them. If you want to change the pairing name, the BT-RS232 must be connected to a computer with a terminal program capable of sending a renaming command on a comport.
- Page 11 AMX, Crestron, computer, etc. You can use the BT-RS232 as it is, no configuration is needed. Simply pair it with a Beoremote One Bluetooth remote and use our Configurator program to read the RS232 commands when you activate the remote, in order to use the RS232 commands as trigger in your own system.
- Page 12 With 2 males and femail connectors, make the combination wired as shown. Wires are simply colored for better overview. You can use any color. Arrows show data direction flow. Simply explained “get started guide” on RS232: http://lintronic.dk/rs232.pdf MALE FEMALE MALE...
- Page 13 Connecting BT-RS232 to a computer ComCab-003 I this example the BT-RS232 is connected directly to the computer using a ComCab-003 USB/RS232 cable. This would be required for renaming the BT-RS232 before pairing, or for testing bluetooth reception from your Beoremote One Bluetooth.
- Page 14 If the computers comport is open, the Configurator will detect the BT-RS232. You open the configuration page for the BT-RS232 if you need to test/verify. If the BT-RS232 is not detected, it is most likely due to the ComCab-003 being related to another comport.
- Page 15 The tool allows customers to verify the data send by their Bang&Olufsen Bluetooth remote. See your Bang&Olufsen One manual on how to pair with LinTronic BT-RS232. When the remote and BT-RS232 are paired, data will be send to the program and the received command will be highlighted in the datagrid.
- Page 16 BT-RS232 controlling the TT455-RT-238 The BT-RS232 can be connected directly to the TT455-RT-238 RS232 port, using a 9-pin crossed male-male cable. You can make the required connections with two breakout interfaces: 1 2 3 4 5 10 9 8 7 6 Or you can use a ComCab-005 and an RS232 CrossOver.
- Page 17 With RS232 breakout interfaces like the shown below, you can easily connect 3 products by a few wires and a screwdriver. See example on next page. Also see the manual for TT455-RT-238 HW6.1: http://lintronic.dk/hw6.pdf MALE Digital input 1 Digital Output 2...
- Page 18 Connecting TT455-RT-238 and BT-RS232 using two comports TT455-RT-238 COMPORT1 COMPORT2 8=Tx 2=Tx 7=Rx 3=Rx 5=GND 5=GND MALE MALE FEMALE to computer BT-RS232 or other device This setup will allow TT455-RT-238 to receive If comport2 is connected to a computer, bluetooth signals on comport1 as an RS232 then wire a female connector as shown.
- Page 19 In this setup you will able to activate the bluetooth remote and see the commands set the mode and trigger automatically. After your Memory Map is saved to the TT455-RT-238, you can immediately test it. When done, connect the BT-RS232 directly to the TT455-RT-238 or simply disconnect the computer.
- Page 20 Parameter 1 (when package is send from other device to BT-RS232) 001 = Requesting product info (example below) 002 = Set pairing name of BT-RS232 (name is a maximum of 16 characters) 003 = Requesting bluetooth status 004 = New pairing (deletes current pairing)
Need help?
Do you have a question about the BT-RS232 and is the answer not in the manual?
Questions and answers