SIM Tech SIMCom SIM7600E-PCIE Hardware Design
  1. Manuals
  2. Brands
  3. SIM Tech Manuals
  4. Control Unit
  5. SIMCom SIM7600E-PCIE
  6. Hardware design

SIM Tech SIMCom SIM7600E-PCIE Hardware Design

Hide thumbs
Table of Contents

Advertisement

Quick Links

SIM7600E_SIM7600E-H-PCIE_Hardware
Design_V1.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIMCom SIM7600E-PCIE and is the answer not in the manual?

Questions and answers

Related Manuals for SIM Tech SIMCom SIM7600E-PCIE

Summary of Contents for SIM Tech SIMCom SIM7600E-PCIE

  • Page 1 SIM7600E_SIM7600E-H-PCIE_Hardware Design_V1.00...

  • Page 2: General Notes

    Smart Machine Smart Decision Document Title SIM7600E_SIM7600E-H-PCIE Hardware Design Version 1.00 Date 2017-11-23 Status Release Document SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 Control ID General Notes SIMCom offers this information as a service to its customers to support the application and engineering efforts that use the products designed by SIMCom. The information provided is based on the requirements specifically from the customers.

  • Page 3: Table Of Contents

    Smart Machine Smart Decision Contents General Notes ................................2 Copyright .................................. 2 Contents ..................................3 Table Index ................................5 Figure Index ................................6 Version History ................................ 7 Introduction ..............................8 Product Outline ............................. 8 Hardware Interface Overview ........................9 Hardware Block Diagram ........................10 Functional Overview ..........................
  • Page 4 Smart Machine Smart Decision Current Consumption ..........................35 Electro-Static Discharge ......................... 36 Packaging ..............................37 Appendix ................................39 Coding Schemes and Maximum Net Data Rates over Air Interface ............39 Related Documents ..........................41 III. Terms and Abbreviations ........................42 Safety Caution ............................
  • Page 5 Smart Machine Smart Decision Table Index TABLE 1: SIM7600E/SIM7600E-PCIE SERIES FREQUENCY BANDS ............... 8 TABLE 2: SIM7600E-PCIE KEY FEATURES ........................ 10 TABLE 3: PCI EXPRESS MINI CARD CONNECTOR PIN DESCRIPTION ............... 13 TABLE 4: RECOMMENDED 3.3V POWER SUPPLY CHARACTERISTICS ............. 16 TABLE 5: PERST# PIN ELECTRONIC CHARACTERISTIC ..................
  • Page 6 Smart Machine Smart Decision Figure Index FIGURE 1: SIM7600E-PCIE BLOCK DIAGRAM ......................10 FIGURE 2: SIM7600E-PCIE PIN OUT DIAGRAM ....................... 12 FIGURE 3: DIMENSIONS OF SIM7600E-PCIE (UNIT: MM) ..................15 FIGURE 4: PERST# REFERENCE CIRCUIT ........................ 16 FIGURE 5: W_DISABLE# REFERENCE CIRCUIT ...................... 17 FIGURE 6: LED_WWAN# REFERENCE CIRCUIT ......................

  • Page 7: Version History

    Smart Machine Smart Decision Version History Date Version Description of change Author 2017-11-23 1.00 Origin Ma Honggang Gao Fan Yuan Shijie SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 2017-11-23...

  • Page 8: Introduction

    Smart Machine Smart Decision 1. Introduction This document describes the electronic specifications, RF specifications, interfaces, mechanical characteristics and testing results of the SIMCom SIM7600E/SIM7600E-H-PCIE (in the following chapter, the document only describe the SIM7600E-PCIE) modules. With the help of this document and other related software application notes/user guides, users can understand and use SIM7600E-PCIE modules to design and develop applications quickly.

  • Page 9: Hardware Interface Overview

    Smart Machine Smart Decision Hardware Interface Overview SIM7600E-PCIE provides various hardware interfaces via Mini PCI Express card connector. Power Supply ● PERST# ● W_DISABLE# ● LED_WWAN# ● WAKE# ● USB Interface ● USIM Interface ● UART Interface ● I2C Interface ●...

  • Page 10: Hardware Block Diagram

    Smart Machine Smart Decision Hardware Block Diagram The following figure is SIM7600E-PCIE hardware block diagram. Main Antenna Aux Antenna GNSS Antenna EAR_N EAR_P Codec MIC_N DDR(1GB) (Optional) GNSS MIC_P GSM/UMTS UMTS NAND(2GB) /LTE /LTE RF FEM RF FEM WAKE# Processor Transceiver USIM Qualcomm...
  • Page 11 Smart Machine Smart Decision TD-HSDPA/HSUPA: 2.2 Mbps(UL), 2.8 Mbps(DL) LTE CAT 4 ：150 Mbps (DL) LTE CAT 4 ：50 Mbps (UL) LTE CAT 1 ：10 Mbps (DL) LTE CAT 1 ：5 Mbps (UL) GSM/UMTS/LTE main antenna. Antenna UMTS/LTE auxiliary antenna GNSS antenna GNSS engine (GPS,GLONASS and BD) GNSS...

  • Page 12: Package Information

    Smart Machine Smart Decision 3. Package Information Pin Out Diagram Figure 2: SIM7600E-PCIE Pin out Diagram SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 2017-11-23...

  • Page 13: Pci Express Mini Card Connector Pin Description

    Smart Machine Smart Decision PCI Express Mini Card Connector Pin Description Table 3: PCI Express Mini Card Connector Pin Description Pin name Pin number Description Comment Power supply 2,24,39,41,52 Power supply for module 3.3V typical 4,9,15,18,21, 26,27,29,34,3 Ground 5,37,40,43,50 Reset If unused, keep PERST# Reset input (Active low)
  • Page 14 Smart Machine Smart Decision Others SIM7600E-PCIE: Wake up host If unused, keep WAKE#/MICP SIM7600E-PCIEA: MIC positive input open. If Analog audio is SIM7600E-PCIE: NC available, wake up MICN SIM7600E-PCIEA: MIC negative input function is invalid. If Analog audio is SIM7600E-PCIE: NC needed,please EARP SIM7600E-PCIEA: Receiver positive output...

  • Page 15: Package Dimensions

    Smart Machine Smart Decision Package Dimensions Figure 3: Dimensions of SIM7600E-PCIE (Unit: mm) SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 2017-11-23...

  • Page 16: Interface Application

    Smart Machine Smart Decision 4. Interface Application Power Supply The recommended power supply voltage of SIM7600E-PCIE is 3.3V. Table 4: Recommended 3.3V Power Supply Characteristics Symbol Parameter Type Unit Power supply voltage Supply current capability 2000 PERST# SIM7600E-PCIE can be reset by pulling the PERST# pin down to ground. The PERST# pin has been pulled up with a 47KΩ...

  • Page 17: W_Disable

    Smart Machine Smart Decision W_DISABLE# The W_DISABLE# pin can be used to control SIM7600E-PCIE to enter or exit the Flight mode. In Flight mode, the RF circuit is closed to prevent interference with other equipments and minimize current consumption. Table 6: W_DISABLE# Pin Status W_DISABLE# status Module operation Input Low Level...

  • Page 18: Wake

    Smart Machine Smart Decision Reference circuit is recommended in the following figure: LED_WWAN# GPIO MODULE Figure 6: LED_WWAN# Reference Circuit WAKE# The WAKE# pin can be used as an interrupt signal to host. Normally it will keep high logic level until certain condition such as receiving SMS, voice call (CSD, video) or URC reporting, then WAKE# will change to low logic level to inform the master (client PC).

  • Page 19: Usb 2.0

    Smart Machine Smart Decision pull-up MODULE WAKE# Interrupt input VDD_1V8 HOST GPIO Figure 9: WAKE# Reference Circuit Note: If Analog audio is available, WAKE# function is invalid. USB 2.0 SIM7600E-PCIE is compliant with USB 2.0 specification. It supports full-speed and high- speed when acting as a peripheral device.

  • Page 20: Usim Interface

    Smart Machine Smart Decision USIM Interface USIM interface complies with the GSM Phase 1 specification and the new GSM Phase 2+ specification for FAST 64 kbps USIM card. Both 1.8V and 3.0V USIM card are supported. USIM interface is powered from an internal regulator in the module.
  • Page 21 Smart Machine Smart Decision SIM Socket USIM_VDD USIM_RST 22ohm USIM_CLK 22ohm USIM_DET PRESENCE 22ohm USIM_DATA 22ohm Module 100nF Figure 11: USIM interface reference circuit with detection function If the USIM card detection function is not used, user can keep the USIM_DET pin open. The reference circuit of 6-pin USIM card holder is illustrated in the following figure.

  • Page 22: Uart Interface

    Smart Machine Smart Decision UART Interface SIM7600E-PCIE provides one UART (universal asynchronous serial transmission) port. The module is as the DCE (Data Communication Equipment) and the client PC is as the DTE (Data Terminal Equipment). AT commands are entered and serial communication is performed through UART interface. The application circuit is in the following figures.

  • Page 23: I2C Interface

    Smart Machine Smart Decision The reference design of the TXB0108RGYR is in the following figures. MODULE TXB0108RGYR 100nF 100nF VCCA VCCB TXD_3.3V RXD_3.3V RTS_3.3V CTS_3.3V DTR_3.3V RI_3.3V UART port Figure 15: Reference circuit of level shift To comply with RS-232-C protocol, the RS-232-C level shifter chip should be used to connect SIM7600E-PCIE to the RS-232-C interface.

  • Page 24: Analog Audio Interface

    Smart Machine Smart Decision Note: SDA and SCL are pulled up to 1.8V via 2.2K resistors in module. So external pull up resistors are not needed in application circuit. For more details about I2C AT commands please refer to document [1]. Table 12: I2C Electrical Characteristic Symbol Parameter...
  • Page 25 Smart Machine Smart Decision These components should be placed to microphone as close as possible The lines in bold type should be 10pF 33pF accorded to differential signal ANTI layout rules MICP 10pF 33pF Electret MODULE Microphone MICN 10pF 33pF ANTI Figure 18: Microphone interface configuration Note: SIM7600E-PCIEA has integrated MIC bias circuit.

  • Page 26: Rf Specifications

    Smart Machine Smart Decision Specifications GSM/WCDMA/LTE RF Specifications Table 15: Conducted transmission power Frequency Power Min. EGSM900 33dBm ±2dB 5dBm ± 5dB DCS1800 30dBm ±2dB 0dBm ± 5dB EGSM900 (8-PSK) 27dBm ±3dB 5dBm ± 5dB DCS1800 (8-PSK) 26dBm +3/-4dB 0dBm ±5dB WCDMA B1 24dBm +1/-3dB <-50dBm...
  • Page 27 Smart Machine Smart Decision Table 17: E-UTRA operating bands E-UTRA Downlink (DL) operating Duplex Operating Uplink (UL) operating band band Mode Band 1920 ~1980 MHz 2110 ~2170 MHz 1710 ~1785 MHz 1805 ~1880 MHz 824～849 MHz 869～894MHz 2500~2570MHz 2620~2690MHz 880 ~915 MHz 925 ~960 MHz 832~862MHz 791~ 821...

  • Page 28: Rf Antenna Connector

    Smart Machine Smart Decision RF Antenna Connector SIM7600E-PCIE have 3 antenna connectors, one of which is the GSM/UMTS/LTE main antenna connector, the others are UMTS/LTE auxiliary antenna connector and GPS/GLONASS/BD antenna connector. Recommended antenna characteristics of SIM7600E-PCIE are described by 2 following tables. Table 20: Recommended Passive Antenna Characteristics Passive Recommended standard...
  • Page 29 Smart Machine Smart Decision Figure 19: U.FL-R-SMT (Unit: mm) Figure 20: U.FL series RF adapter cable (Unit: mm) To facilitate the antenna tuning and certification test, a RF connector and an antenna matching circuit should be added. The following figure is the recommended circuit. MAIN ANT RF connector Matching circuit...

  • Page 30: Gnss

    Smart Machine Smart Decision In above figure, the components R1,C1,C2 and R2 are used for antenna matching, the value of components can only be got after the antenna tuning, usually, they are provided by antenna vendor. By default, the R1, R2 are 0Ω resistors, and the C1, C2 are reserved for tuning.

  • Page 31: Gnss Operate Mode

    Smart Machine Smart Decision GLONASS: 1597.5~1605.8 MHz BD: 1559.05~1563.14 MHz Update rate: Default 1 Hz GNSS data format: NMEA-0183 GNSS Current consumption : 100mA (GSM/UMTS/LTE Sleep ,in total on VBAT pins) GNSS antenna: Passive/Active antenna It is suggested either the external LNA or active antenna used. It is not needed for both of them at the same time.
  • Page 32 Smart Machine Smart Decision 1.7V~3.05V PCIE 33PF 10 ohm 100NF VDD_AUX 56nH GNSS ANT Matching circuit 33pF GNSS_ANT MODULE Figure 23: Active antenna circuit In above Figure 23 the active antenna is used, If users want to change the voltage of VDD_AUX, use this AT command;...

  • Page 33: Electrical Specifications

    Smart Machine Smart Decision 6. Electrical Specifications Absolute Maximum Ratings The absolute maximum ratings are described by the following table. Module may be damaged beyond these ratings. Table 23: Absolute maximum ratings Symbol Parameter Type Unit VCC input voltage -0.3 Voltage at digital pins -0.3 (1.8V digital I/O) *...

  • Page 34: Power Saving Mode

    Smart Machine Smart Decision Connection between two subscribers is in progress. In this GSM /UMTS/LTE case, the power consumption depends on network settings Talk such as DTX off/on, FR/EFR/HR, hopping sequences, antenna. Module is ready for data transmission, but no data is GPRS/EDGE/UMTS/ currently sent or received.

  • Page 35: Current Consumption

    Smart Machine Smart Decision Current Consumption The current consumption is listed in the table below. Table 26: Current Consumption (VCC=3.3V) GNSS GNSS supply current @ -140dBm，Tracking Typical:35mA (AT+CFUN=0,with USB connection) GSM sleep/idle mode GSM/GPRS supply current Sleep mode@ BS_PA_MFRMS=2 Typical: 2.8mA (GNSS off，without USB connection) Idle mode@ BS_PA_MFRMS=2 Typical: 18mA UMTS sleep/idle mode...

  • Page 36: Electro-Static Discharge

    Smart Machine Smart Decision @5Mbps 22.6dBm Typical: 560mA LTE-FDD B8 @10Mbps 22.6dBm Typical: 600mA @5Mbps 23.4dBm Typical: 689mA LTE-FDD B20 @10Mbps 23.6dBm Typical: 698mA @5Mbps 23.0dBm Typical: 512mA LTE-TDD B38 @10Mbps 23.0dBm Typical: 544mA @5Mbps 23.0dBm Typical: 495mA LTE-TDD B40 @10Mbps 23.0dBm Typical: 512mA @5Mbps...

  • Page 37: Packaging

    Smart Machine Smart Decision 7. Packaging SIM7600E-PCIE module support tray packaging. Figure 24: Tray packaging Module tray drawing: Figure 25: Tray drawing SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 2017-11-23...
  • Page 38 Smart Machine Smart Decision Table 28: Tray size Length（±3mm） Width（±3mm） Number 245.0 165.0 Small carton drawing: Figure 26: Small carton drawing Table 29: Small Carton size Length （ ±10mm） Width（±10mm） Height（±10mm） Number 10*10=100 Big carton drawing: Figure 27: Big carton drawing Table 30: Big Carton size Length （...

  • Page 39: Appendix

    Smart Machine Smart Decision Appendix I. Coding Schemes and Maximum Net Data Rates over Air Interface Table 31: Coding Schemes and Maximum Net Data Rates over Air Interface Multislot definition(GPRS/EDGE) Slot class DL slot number UL slot number Active slot number GPRS coding scheme Max data rata（4 slots）...
  • Page 40 Smart Machine Smart Decision Category 6 3.6Mbps 16QAM,QPSK Category 7 7.2Mbps 16QAM,QPSK Category 8 7.2Mbps 16QAM,QPSK Category 9 10.2Mbps 16QAM,QPSK Category 10 14.4Mbps 16QAM,QPSK Category 11 0.9Mbps QPSK Category 12 1.8Mbps QPSK Category 13 17.6Mbps 64QAM Category 14 21.1Mbps 64QAM Category 15 23.4Mbps 16QAM...

  • Page 41: Related Documents

    Smart Machine Smart Decision II. Related Documents Table 32: Related Documents Title Description SIM7500_SIM7600 Series_AT Command SIM7600 AT command document Manual_V1.xx.pdf ITU-T Draft new Serial asynchronous automatic dialing and control recommendationV.25ter Digital cellular telecommunications (Phase 2+); AT command GSM 07.07 set for GSM Mobile Equipment (ME) GSM 07.10 Support GSM 07.10 multiplexing protocol...

  • Page 42: Terms And Abbreviations

    Smart Machine Smart Decision Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain [20] 2002/95/EC hazardous substances in electrical and electronic equipment (RoHS) [21] Module Module secondary SMT Guidelines secondary-SMT-UGD-V1.xx [22] SIM7100_GPS_Application...
  • Page 43 Smart Machine Smart Decision Abbreviation Description Analog-to-Digital Converter Antenna Reference Point Bit Error Rate Base Transceiver Station Coding Scheme Circuit Switched Data Clear to Send Digital-to-Analog Converter Discontinuous Reception Digital Signal Processor Data Terminal Equipment (typically computer, terminal, printer) Data Terminal Ready Discontinuous Transmission Enhanced Full Rate EGSM...

  • Page 44: Safety Caution

    Smart Machine Smart Decision SIM phonebook Not connect EDGE Enhanced data rates for GSM evolution HSDPA High Speed Downlink Packet Access HSUPA High Speed Uplink Packet Access Zero intermediate frequency WCDMA Wideband Code Division Multiple Access VCTCXO Voltage control temperature-compensated crystal oscillator USIM Universal subscriber identity module UMTS...
  • Page 45 Smart Machine Smart Decision When in a hospital or other health care facility, observe the restrictions about the use of mobiles. Switch the cellular terminal or mobile off, medical equipment may be sensitive to not operate normally for RF energy interference. Switch off the cellular terminal or mobile before boarding an aircraft.
  • Page 46 Smart Machine Smart Decision Contact us: Shanghai SIMCom Wireless Solutions Ltd. Add: SIM Technology Building, No.633, Jinzhong Road, Changning District, Shanghai P.R. China 200335 Tel：+86 21 3235 3300 Fax：+86 21 3235 3020 URL：www.simcomm2m.com SIM7600E_SIM7600E-H-PCIE_Hardware_Design_V1.00 2017-11-23...

This manual is also suitable for:

Simcom sim7600e-h-pcie

Table of Contents