Attach the base to the end panel front post first,
using 2 of the 85mm screws and then secure the rear
post in the same way.
Step 11
Slide the remaining end panel into place as shown
above and attach it to the frame as you did with the
first end panel with 85mm screws into the front and
rear posts. If you are fitting a kindling shelf, omit
steps 12 -14 and attach the front posts before fitting
the kindling shelf & lattice and then attaching the
roof.
Normanton/ Hambleton
/Cottesmore 4/6ft log and tool store
Step 9
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 7670072 VAT No: 151744027
Using more of the 85mm screws now attach the base
to the rear posts as shown.
Carefully place the roof on top of the log store.
4
Step 10
Step 12
Need help?
Do you have a question about the Normanton and is the answer not in the manual?
Questions and answers