Getpower; Wwanresettofactorydefault; Wwangetcurrentband - Huawei MU736 HSPA+ M.2 Connection Manual

HUAWEI MU736 HSPA+ M.2 Module
Connection Management API

1.7.3 GetPower

Description
This function returns the operating mode of the device.
Function timeout
30 sec
Prototype
ULONG GetPower(ULONG * pPowerMode);
Parameters
Type
ULONG *

1.7.4 WWANResetToFactoryDefault

Description
This function requests the device to reset configuration to factory defaults.
Function timeout
5 min
to 5 min.
Prototype
ULONG WWANResetToFactoryDefault();

1.7.5 WWANGetCurrentBand

Description
This function gets the current band class information and current center frequency
information.
Issue 01(2013-03-12)
The function returns result in a 1 sec timeout added to 30 sec.
Variable
pPowerMode
NOTE
Upon successful completion, this function requests the device reset (device will reset after all
open handles are released).
Additionally, the request to reset the device results in a 2 sec timeout added
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HW Connection Management API
Mode Description
OUT Selected operating mode (see
Table 1-4 )
19