JLab EPIC2 Quick Start Manual

We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
30
DAY
FIRST TIME SETUP: BLUETOOTH PAIRING
1
When power is OFF,
press and hold Power
Button for 10 seconds.
Voice prompt "Ready
to pair" followed by
blue and red blinking
lights indicate Epic2 is
in pairing mode.
RECURRING USE
Once JLab Epic2 has initially paired to your device, the earbuds will auto-connect to your Bluetooth device when powered back ON.
(Follow BUTTON FUNCTIONS
CHARGING
1 Locate the Micro USB door
and plug in the cable.
Then connect the USB to a
computer or AC power source.
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date.
jlabaudio.com/guarantee
Learn more at
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
Turn on the Bluetooth
2
in your device settings.
Settings
Bluetooth
instructions)
jlabaudio.com/contact
or visit
Select "Epic2 BT" in your device settings to connect.
3
If a password is required type in "0000".
Light will slow blink blue when Bluetooth is paired.
Voice prompt "You are connected" followed by a
slow blue blinking light indicates connection.
Settings
Bluetooth
JLab Epic2 BT
2 Red light indicates charging
and will turn off once battery
is fully charged.
Full charge is approximately
4 hours.
3 To ensure the water resistance
of your Epic2, the cover for the
Micro USB port must be firmly
closed.