Advertisement
APPLICATION
Only radios with identical model numbers
can be cloned.
The PMKN4003 Cloning Cable is used with
certain conventional PL and trunking LTR
radios. Contact your Motorola representative
for radio model/cloning cable match.
GENERAL INFORMATION
Cloning is the process of copying the content
of one radio (source radio) into another radio
(target radio). Radio content refers to system
type features such as frequency, squelch
type, options, etc.
Signalling Identification Numbers (IDs) are
duplicated in the cloning process.
Note: Tuning and alignment information are
not transferable and are not affected by
cloning.
Unsuccessful cloning attempts will not
damage the radio.
CLONING PROCEDURE
1. Turn off source and target radio;
then connect cloning cable to side
connector of each radio.
2. Turn on target radio.
3. Source radio —Simultaneously
press and hold side buttons 1 and 2
(see illustration); then turn on radio.
Both radios produce a "clone-entry"
tone and turn on their green LEDs.
(P040/P080)
1
1
2
P
T
T
Advertisement
