Crest Audio CR-4 User Manual page 20

1.4.2 Scuba Mode Settings
Description: Conservative Factor
Settings
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at CF and then press MODE
Button to select.
The CF value at the bottom of the screen
will start blinking. Switch the option with
the UP Button / DOWN Button once the
desired CF option appears select it by
pressing the MODE button once to accept
the value. The computer will recalculate
and present the NDL values corresponding
with the pre-set conservative value you
enter.
Options:
There are 3 CF levels:
CF1 (Conservative), CF2 (Normal) and
CF3 (Aggressive).
WARNING:
Please make sure you fully understand
that changing this setting will affect
algorithm calculations and the related
risks.
Description: Depth Alarm – ON/OFF
To Access: Under Scuba Preview Mode,
press UP Button Or from SETTINGS,
press UP Button / DOWN Button to locate
the cursor at SDPT-ALM and then press
MODE Button to select.
One of the two options will be blinking at
the bottom. Press UP Button / DOWN
Button to select and press MODE Button
once to accept your selection.
If you set the SDPTH-ALM on, when you
reach the preset depth, the alarm will
activate.
S = Scuba
DPTH = Depth
ALM = Alarm
20