Rukket SPDR Assembly Instructions

Our video instructions provide the best guidance for setting up your SPDR Net.
Please call us if you have any questions or concerns at
1. Unfold the frame's middle
cross beam. The frame will lay
at on a rubber base.
4. On the left arm, fully
extended the berglass top half
of the arm. Lock into place with
the cotter pin.
SPDR NET
ASSEMBLY INSTRUCTIONS
They can be viewed online at
Please read our product safety warnings before setup
1
2. Unfold the legs, making
sure that the locking button
is fully extended.
4
5. Bring up the right arm, but
do not extend it all the way up.
Rest the base pin on the groove
that is half way up the bottom
base plate.
1-855-4RUKKET
2
3. Bring up the left arm. Lock it
into place using the base pin.
Make sure the pin is fully
inserted into the base.
5
6. Fully extend the berglass top
half of the left pole. The arms
should be slanted in the same
direction, as shown above.
3
6
V1