Operating The Washer-Dryer; Control Panel; Touch Display And Sensor Controls - Miele WTR 860 WPM Operating Instructions Manual

Operating the washer-dryer

Control panel

a Sensor control 
Takes you back one level in the menu.
b Touch display
c Start/Stop sensor control
Touching the Start/Stop sensor control starts the selected programme or can-
cels a programme that has already been started. The programme can be star-
ted as soon as the sensor control is flashing on and off. The sensor control
lights up constantly once the programme has started.
d Optical interface
This is used by the Customer Service Department as a transmission point.
e Button 
For switching the washer-dryer on and off. The washer-dryer switches off auto-
matically to save energy. It is switched off 15 minutes after the end of the pro-
gramme/Anti-crease phase, or after being switched on if no further selection is
made.

Touch display and sensor controls

The  and Start/Stop sensors and the sensors in the display react to finger tip
contact.
The touch display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the display with your fingers.
16