Do you have a question about the WH43S1E and is the answer not in the manual?
Questions and answers
Carla Johnson
February 12, 2025
The door want close
1 comments:
Mr. Anderson
February 12, 2025
The Whirlpool WH43S1E door may not close tightly due to the following reasons: - Something inside the refrigerator is preventing the door from closing. - The door gasket is dirty and not sealing properly.
To fix this, check for any obstructions inside the fridge and clean the door gasket using warm water and mild detergent.
This answer is automatically generated
Bill
March 4, 2025
I just need the part number for a thermostat for mini fridge model #WH43S1E
Barry Averso
April 22, 2025
Do I have to clean the condenser coils on my mini fridge because my freezer is not getting really cold it's only like 25°. And if I need to clean them how do I do it because I can't find the coils they seem to be sealed inside
Your safety and the safety of others is very important. We have provided important safety messages in this manual Disposal of the refrigerator and on your appliance. Always read and obey all safety messages. Grounding instructions This is the safety alert symbol. Location requirements This symbol alerts you to potential hazards that can kill or hurt you...
Page 3
DISPOSAL OF THE REFRIGERATOR WARNING WARNING Suffocation Hazard Remove door from your old refrigerator. Failure to do so can result in death or brain damage. Explosion Hazard Before you throw away your old refrigerator: Keep flammable materials and vapors, such as 1.
Before using the refrigerator for the first time, remove all of the packing PARTS AND FEATURES materials, including the foam base and adhesive tape holding accessories in place. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
SPECIFICATIONS WARNING Model WH43S1E Electric shock protection type Capacity (cu.ft) Voltage (V) Explosion Hazard Use nonflammable cleaner. Frequency (Hz) Failure to do so can result in death, explosion, or fire. Current (A) Sound [dB] < Energy Consumption (kwh/24h) 0.62 • Clean the interior of the appliance with a mixture of warm water and baking soda, use about 1-2 tablespoons per quart of water.
Page 6
WARNING WARNING Excessive Weight Hazard Use two or more people to move and install refrigerator. Electrical Shock Hazard Failure to do so can result in back or other Disconnect power before cleaning. injury. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock.
Page 7
Uninstall the cover and replace the light with a screwing light (120V/10W). Top hinge cover Refer to the illustrations and instructions below: Top hinge screw Top hinge 1. Move the lamp cover 1.2~2 (3.05-5.08 cm) according to arrow point direction. "...
Page 8
WARNING Make sure that nothing inside the refrigerator is causing the door to not close Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
Page 9
Assistance We exclude all claims for special, incidental, and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount Before calling for assistance or service, please check “Troubleshooting”. It may save of the purchase price. Every implied warranty, including any statutory You the cost of a service call.
Need help?
Do you have a question about the WH43S1E and is the answer not in the manual?
Questions and answers
The door want close
The Whirlpool WH43S1E door may not close tightly due to the following reasons:
- Something inside the refrigerator is preventing the door from closing.
- The door gasket is dirty and not sealing properly.
To fix this, check for any obstructions inside the fridge and clean the door gasket using warm water and mild detergent.
This answer is automatically generated
I just need the part number for a thermostat for mini fridge model #WH43S1E
Do I have to clean the condenser coils on my mini fridge because my freezer is not getting really cold it's only like 25°. And if I need to clean them how do I do it because I can't find the coils they seem to be sealed inside