MANUAL for KG30 - KG50 SUpreMe CONTeNTS geNeRaL INFORMaTION SHUTTINg DOWN • Dry aND Thermal Cleaning Process 2 THe DRY ICe BLaSTINg MaCHINe • No Residual Blasting Media eMeRgeNCY STOP DRY ICe BLaSTINg – How It Operates • Dry Ice Pellets PReCaUTIONS –...
MANUAL for KG30 - KG50 SUpreMe geNeRaL INFORMaTION the dry ice blasting machine and its accessories this change from a solid to a gaseous form, the have been developed with the aim of supplying accompanying tremendous expansion in volume, cleaning equipment which minimizes consequential the high kinetic energy and the low temperatures cleaning costs and combines the best characteristics are the most important factors which result in the...
MANUAL for KG30 - KG50 SUpreMe SaFeTY RegULaTIONS general this manual contains instructions and safety regula- tions which must be followed while starting, opera- ting and maintaining the dry ice blasting machine. Precautions during Blasting it is important that the manual is kept, so the operator always knows its exact location.
MANUAL for KG30 - KG50 SUpreMe Static electricity Danger of Thrown Loose Objects serious discharge of static electricity can occur. there is a risk of dry ice pellets and small objects always make sure that objects to be cleaned are being deflected back during blasting.
MANUAL for KG30 - KG50 SUpreMe Concentrations Dust dry ice pellets are co in a solid form. at normal certain types of dust have a tendency to pulverize atmospheric pressure, co can only exist in a solid during the cleaning process. therefore we recom- form at a temperature of -79°c/-110°f or lower.
MANUAL for KG30 - KG50 SUpreMe MaCHINe ILLUSTRaTIONS 1 handle on hopper lid. 7 machine wheel brakes. ger switch on the blasting must remain applied when gun is activated. as soon as 2 hopper lid. the machine is in operation. the trigger switch on the maintained in open position blasting gun is released, the...
Page 9
MANUAL for KG30 - KG50 SUpreMe MaCHINe ILLUSTRaTIONS a compressed-air-driven 6 signal cable from blasting 10 static ground cable vibrator on the hopper. hose. transfers signals from Important! the trigger switch on the When lifting with a forklift 1 hopper. blasting gun to the machine control.
MANUAL for KG30 - KG50 SUpreMe CONTROL PaNeL 1 machine on / off. 2 consumption of dry ice in kg/h -lbs/min. 3 emergency stop. 4 air supply pressure. 5 blasting pressure. 6 Knob for adjusting air pressure. 7 Warning symbols and instructions.
MANUAL for KG30 - KG50 SUpreMe ICegUN HD SUPReMe WITH LIgHT light. safety switch. two-step trigger. - blasting with dry ice and air. - blasting with air only. 4 signal cable. 5 standard round nozzle - interchangeable. 6 nozzle holder. Dim.
MANUAL for KG30 - KG50 SUpreMe STaRTINg THe DRY ICe BLaSTINg MaCHINe Setting Up 1 make sure the machine is on a level, horizontal surface, and that the wheel brakes are applied. 2 plug the blasting hose couplings into the socket on the machine front and the blasting gun, respectively.
Page 13
MANUAL for KG30 - KG50 SUpreMe 8 check to make sure that the machine is in normal operating position (the emergency stop button is pulled out). 9 turn the machine on (press the green on button). 10 the iceblast machine is equipped with a static ground cable which is mounted on the front of the iceblast machine.
MANUAL for KG30 - KG50 SUpreMe NOZZLe SeLeCTION aND aIR CONSUMPTION Nozzle Diameter and Blast Pattern air Consumption Table The nozzle selection should be based on finding the air consumption table indicates the air con- the best combination of air consumption, dry ice sumption in relation to nozzle size and blasting pressure.
MANUAL for KG30 - KG50 SUpreMe TeCHNICaL DaTa Power Consumption IceBlast Kg50 1” Supreme Dimensions (mm/inch) 110/230 V ac 50-60 hz length: 700 / 27.5 800 W Width: 550 / 21.6 height incl. handle: 1160 / 45.6 Blasting hose inside diameter: 1” Weight kg: 90 / lbs: 198 Single Hose System...
Page 21
MANUAL for KG30 - KG50 SUpreMe KG30 - KG50 Supreme “ The system produces no waste products. Only the coating that has been removed remains to be disposed of, and this can usually be swept or vacuumed from the floor. ”...
MANUAL for KG30 - KG50 SUpreMe ICegUN HD ICegUN WITH LIgHT ¾” • Spare Parts for Icegun HD Supreme ¾” with Light Icegun HD Supreme ¾” Description with Light ICegUN WITHOUT LIgHT ¾” • Spare Parts for Icegun HD Supreme ¾” without Light Icegun HD Supreme ¾”...
IceBlast KG30 ¾” Supreme USA 110V UL MANUAL for KG30 - KG50 SUpreMe “ a broad range of accessories can be supplied for the blasting gun, ensuring maximum efficiency. ”...
Page 29
MANUAL for KG30 - KG50 SUpreMe “ The system produces no waste products. Only the coating that has been removed remains to be disposed of, and this can usually be swept or vacuumed from the floor. ”...
IceBlast KG30 ¾” Supreme -Bottom USA 110V UL MANUAL for KG30 - KG50 SUpreMe “ a broad range of accessories can be supplied for the blasting gun, ensuring maximum efficiency. ”...
Page 43
MANUAL for KG30 - KG50 SUpreMe “ The system produces no waste products. Only the coating that has been removed remains to be disposed of, and this can usually be swept or vacuumed from the floor. ”...
Need help?
Do you have a question about the KG30 SUPREME and is the answer not in the manual?
Questions and answers