Battery Access - watt box WB-OVRC-UPS-1100-1 Owner's Manual

WB-OVRC-UPS-1100/1500/2000 Owner's Manual
BATTERY REPLACEMENT (SERVICE PERSON ONLY)
The UPS is equipped with user-replaceable batteries that can be hot-swapped while connected equipment is powered from the supply outlet.
Contact WattBox Support to order replacement batteries.
NOTE: With the batteries disconnected for replacement, connected equipment is not protected from power outages.
NOTE: This UPS is equipped with internal batteries and only the service person can replace the batteries.

BATTERY ACCESS

Step 1
Remove the front panel cover.
Step 4
Remove the top cover of the battery box.
See the opposite page for battery swap
instructions for your model.
Step 7
Replace the front panel cover.
pg.12
Step 2
Disconnect the battery wires.
Step 5
After swapping the batteries, replace the
battery tray in the UPS and reattach the
battery cover. Tighten the screws securely.
Step 3
Remove the four battery panel screws, set
the cover aside, and pull the battery tray
from the front of the UPS.
Step 6
Reconnect the battery wires.