Figure 50: System Status In Kiwa Mode; Figure 51: Dip Switches For Kiwa Pressure Boosting; Figure 52: Enabling P1 And P2 - DAB E.Box Plus Instruction For Installation And Maintenance

Hide thumbs Also See for E.Box Plus:

Table of Contents

Available languages

8.13 System status in Kiwa mode

8.14 Setting the E.box with dip switches

If the E.box is provided with a display, it is recommended to use the display for configuration. Otherwise it is possible

to use the dip switches inside the panel and set them as shown in Figure 51.

8.15 Activation of the set

To activate the set it is necessary to enable the pumps. During the first configuration, for safety's sake, the

pumps are disabled and are OFF. To change to automatic mode, just briefly press the

pumps P1 and P2. As shown in Figure 52.

Figure 50: System status in KIWA mode

buttons on the

Table of Contents

Do you have a question about the E.Box Plus and is the answer not in the manual?

E.box plus d E.box basic E.box basic d