Replacing The Power Cable - Dell PowerEdge 15FP Installation Manual

Unless you are replacing the power cord, close the cable cover and tighten the captive
8
Phillips screw.
F i g u r e 1 - 1 0 . R o u t i n g t h e K e y b o a r d C a b l e
cable-management arm
cutout
securing hook

Replacing the Power Cable

NOTE: If the correct power cable for your region is not already installed, perform the
following procedure to replace the existing power cable with the correct one from the
1-U KMM tray kit; otherwise, continue to "Completing the Cable Connections."
Detach the power cord from the AC adapter and pull it from beneath the securing
1
hooks on the bottom of the cable enclosure. See Figure 1-10.
securing clip
power cable
AC adapter
keyboard/trackball
cable
Installation Guide
1-15