Table of Contents
Advertisement
Quick Start
First insert a microUSB power cable to the device. You may use any source capable of
supplying at least 500 mA.
Second, connect your console to the device via the SCART connector.
Third, connect the device to your display via a Digital Video cable. You should now see the
output from your console on your display.
Finally, press the 'FITLER' button until your desired effect is shown. The effect cycles between
normal (blocky), smoothed and scanline effects.
The RetroTINK-2X SCART remembers the filter settings between power cycles.
Copyright RetroTINK LLC 2020
Page
4
of
7
All Rights Reserved
Advertisement
Table of Contents
Need help?
Do you have a question about the 2X-SCART and is the answer not in the manual?
Questions and answers